 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com 4-238-488-12(2) FM Stereo FM-AM Receiver Operating Instructions Owner's Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. STR-DE985/DE885 Serial No. STR-DE985 STR-DE885 (c) 2002 Sony Corporation www..com WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. For customers in the United States - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For customers in Canada CAUTION TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. For customers in the United States and Canada This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING ENERGY STAR(R) is a U.S. registered mark. As an ENERGY STAR(R) partner, Sony Corporation has determined that this product meets the ENERGY STAR(R) guidelines for energy efficiency. This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. ** "DTS", "ES" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. 2US This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: www..com Table of Contents List of Button Locations and Reference Pages Main unit ............................................... 5 Receiving Broadcasts Direct tuning ........................................ 40 Automatic tuning ................................. 40 Preset tuning ........................................ 41 Hooking Up the Components Required cords ....................................... 6 Antenna hookups ................................... 7 Audio component hookups .................... 8 Video component hookups .................. 10 Digital component hookups ................. 11 Multi channel input hookups ............... 13 Other hookups ..................................... 14 Other Operations Naming preset stations and program sources ........................................... 42 Recording ............................................ 42 Using the Sleep Timer ......................... 43 Adjustments using the CUSTOMIZE button ............................................ 44 CONTROL A1 control system ......... 46 Hooking Up and Setting Up the Speaker System Speaker system hookups ..................... 17 Performing initial setup operations ..... 19 Multi channel surround setup .............. 19 Checking the connections .................... 25 Operations Using the Remote RM-PG4111) and RM-PP4112) Before you use your remote ................ 48 Remote button description ................... 48 Selecting the mode of the remote ........ 52 Programming the remote ..................... 52 Learning the commands of your components3) ................................. 55 Performing several commands in sequence automatically (Macro Play)3) ................................ 57 Basic Operations Selecting the component ..................... 26 Listening to the sound in another room1) ............................... 28 Changing the display ........................... 28 Enjoying Surround Sound Automatically decoding the input audio signal ................................... 29 Selecting a sound field ........................ 29 Using only the front speakers (2 Channel Stereo) ......................... 32 Enjoying stereo sound in multi channel (Dolby Pro Logic ) ..................... 32 Selecting the surround back decoding mode (SURR BACK DECODING) ................................ 33 Understanding the multi channel surround displays .......................... 34 Customizing sound fields .................... 35 Additional Information Precautions .......................................... 58 Troubleshooting ................................... 58 Specifications ...................................... 61 Tables of settings using SURR, LEVEL, EQ, SET UP and CUSTOMIZE buttons ................... 63 Adjustable parameters for each sound field ..................................... 66 1) STR-DE985 only 2) STR-DE885 only 3) RM-PG411 only 3US www..com About This Manual The instructions in this manual are for models STR-DE985 and STR-DE885. Check your model number by looking at the lower right corner of the front panel. In this manual, the STR-DE985 is used for illustration purpose unless stated otherwise. Any difference in operation is clearly indicated in the text, for example, "STR-DE985 only". About area codes Note for the supplied remote For RM-PG411 (STR-DE985 only) The MPX/DUAL and 12 buttons on the remote are not available. For RM-PP411 (STR-DE885 only) The AUX, SOURCE, MPX/DUAL, 12 and ON SCREEN buttons on the remote are not available. The area code of the receiver you purchased is shown on the lower portion of the rear panel (see the illustration below). FRONT A TROL II SURROUND CENTER SURR BACK + R L R + L + EO - SPEAKERS NITOR OUT SURR BACK - IMPEDANCE USE 8 - 16 - R L L L + - + - R L FRONT B R R SUB WOOFER E OUT SPEAKERS AC OUTLET IMPEDANCE USE 8 - 16 4-XXX-XXX-XX AA Area code Any differences in operation, according to the area code, are clearly indicated in the text, for example, "Models of area code AA only". Tip The instructions in this manual describe the controls on the receiver. You can also use the controls on the supplied remote if they have the same or similar names as those on the receiver. For details on the use of your remote, see * pages 48-57 for RM-PG411 (STR-DE985 only) * pages 48-55 for RM-PP411 (STR-DE885 only) 4US List of Button Locations and Reference Pages www..com How to use this page Illustration number r List of Button Locations and Reference Pages Use this page to find the location of buttons that are mentioned in the text. CUSTOMIZE qd (42, 44, 65) R R Name of button/part Reference page Main unit ALPHABETICAL ORDER 0-9 2CH wl (31, 32) 2ND ROOM (STR-DE985 only) wd (28) EQUALIZER wj (38) FM eh (40) FM MODE ej (40) FUNCTION wf (26, 59) INPUT MODE wh (26) IR (receptor) 5 (48, 60) A-D A. DEC ea (29, 31) AM eg (40) CINEMA STUDIO EX A, B, C qf (30) CUSTOMIZE qd (42, 44, 65) Digital Cinema Studio (indicator) qj (29) DIGITAL CONCERT HALL A, B qk (31) DIMMER r; (28) DISPLAY 4 (28, 60) Display qg (28) J-N Jog dial ef (20, 35, 37, 38, 42, 44, 63) LEVEL q; (25, 37, 63) MASTER VOLUME ws (25, 58) MEMORY el (41) MODE (FUNCTION) wg (26) MODE (SOUND FIELD) e; (30, 31, 59) MULTI/2CH ANALOG DIRECT wk (27) MULTI CHANNEL DECODING (indicator) qa (27) MUTING wa (27, 58) PHONES (jack) 3 (27, 59) PRESET TUNING +/- 6 (41, 62) SB DEC (indicator) qh (33) SET UP qs (20, 65) SHIFT ek (41) SPEAKERS A/B 2 (17, 27, 35, 58) SURR 9 (35, 63) SURR BACK DECODING w; (33) T-Z TUNING +/- 7 (40) VIDEO 3 DIGITAL INPUT (jack) rd (11) VIDEO 3 INPUT (jacks) rs (10) VIDEO SELECT INDICATOR ql (26) BUTTON DESCRIPTIONS E-I ENTER es (42) EQ 8 (38, 64) O-S ON SCREEN (STR-DE985 only) ra (10) ?/1 (power) 1 (19, 25, 39, 62) / ed (20, 35, 37, 38, 42, 44, 63) 1234 56 7 89 q;qaqsqdqf qgqhqjqkql w;wa ws g rd rs rar;elekejeheg efed esea e; wl wk wj wh wg wf wd 5GB Hooking Up the Components www..com Required cords The following cords A - H are required when you hook up the components (pages 8-15). A Audio cord (not supplied) White (L) Red (R) White (L) Red (R) B Audio/video cord (not supplied) Yellow (video) White (L/audio) Red (R/audio) Yellow (video) White (L/audio) Red (R/audio) C Video cord (not supplied) Yellow (video) Yellow (video) D Optical digital cord (not supplied) Black Black E Coaxial digital cord (not supplied) Orange Orange F Monaural audio cord (not supplied) Black Black G Audio/video/control S cord (1 for models of area code U, CA) (STR-DE985 only) Yellow (video) White (L/audio) Red (R/audio) Black (control S) Yellow (video) White (L/audio) Red (R/audio) Black (control S) H Monaural mini-plug cord (1 for models of area code U, CA) (STR-DE985 only) Black Black Before you get started * Turn off the power to all components before making any connections. * Do not connect the AC power cord until all of the connections are completed. * Be sure to make connections firmly to avoid hum and noise. * When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on the components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red. * When you connect optical digital cords, insert the cord plugs straight in until they click into place. * Do not bend or tie the optical digital cord. 6US www..com Antenna hookups AM loop antenna (supplied) Hooking Up the Components FM wire antenna* (supplied) DIGITAL OPTICAL CD/ SACD IN MD/DAT OUT MD/DAT IN TV/SAT IN DVD/LD IN COAXIAL C ANTENNA CTRL S STATUS IN S-VIDEO IN S-VIDEO IN CTRL S OUT CTRL S OUT S-VIDEO OUT S-VIDEO IN S-VIDEO OUT CTRL S IN COMPONENT AM VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT Y y L FM 75 COAXIAL MONITOR PB/B - Y y SIGNAL GND R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN PR/R - Y TV/SAT IN DVD/LD IN TV/SAT DVD/LD VIDEO 2 VIDEO 1 L L L L CENTER L CENTER L IN R IN OUT R IN OUT R IN R PHONO CD/SACD MD/DAT TAPE FRONT SURROUND WOOFER SUB R FRONT SURROUND SURR BACK SUB WOOFER R OUT MULTI CH IN 2 MULTI CH IN 1 2ND ROOM * The shape of the connector varies depending on the area code. Notes on antenna hookups * To prevent noise pickup, keep the AM loop antenna away from the receiver and other components. * Be sure to fully extend the FM wire antenna. * After connecting the FM wire antenna, keep it as horizontal as possible. * Do not use the U SIGNAL GND terminal for grounding the receiver. 7US www..com Audio component hookups MD or DAT deck INPUT OUTPUT LINE LINE L STR-DE985 only Turntable A A c R A c OUT IN DIGITAL OPTICAL CD/ SACD IN MD/DAT OUT MD/DAT IN TV/SAT IN DVD/LD IN COAXIAL CO ANTENNA CTRL S STATUS IN S-VIDEO IN S-VIDEO IN CTRL S OUT CTRL S OUT S-VIDEO OUT S-VIDEO IN S-VIDEO OUT CTRL S IN COMPONENT V AM VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT Y y L FM 75 COAXIAL MONITOR PB/B - Y y SIGNAL GND R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN PR/R - Y TV/SAT IN DVD/LD IN TV/SAT DVD/LD VIDEO 2 VIDEO 1 L L L L CENTER L CENTER L IN R IN OUT R IN OUT R IN R PHONO CD/SACD MD/DAT TAPE FRONT SURROUND WOOFER SUB R FRONT SURROUND SURR BACK SUB WOOFER R OUT MULTI CH IN 2 MULTI CH IN 1 2ND ROOM c OUT A OUTPUT LINE L A INPUT OUTPUT LINE LINE L c IN A R R CD or SACD player Tape deck Note on audio component hookups If your turntable has a ground wire, connect it to the U SIGNAL GND terminal. 8US www..com STR-DE885 only MD or Tape deck Hooking Up the Components INPUT OUTPUT LINE LINE L Turntable A A c OUT R A c IN DIGITAL OPTICAL CD/ SACD IN MD/ TAPE OUT MD/ TAPE IN TV/SAT IN DVD/LD IN COAXIAL ANTENNA S-VIDEO IN S-VIDEO IN S-VIDEO OUT S-VIDEO IN S-VIDEO OUT COMPONENT AM VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT Y MONITOR PB/B - Y y L FM 75 y SIGNAL GND COAXIAL R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN PB/R - Y TV/SAT IN DVD/LD IN TV/SAT DVD/LD VIDEO 2 VIDEO 1 L L CENTER IN IN OUT R IN R PHONO CD/SACD MD/TAPE FRONT SURROUND WOOFER SUB MULTI CH IN A OUTPUT LINE L R CD or SACD player Note on audio component hookups If your turntable has a ground wire, connect it to the U SIGNAL GND terminal. 9US www..com Video component hookups TV or satellite tuner OUTPUT AUDIO OUT L R VIDEO OUT DVD or LD player OUTPUT AUDIO OUT L R VIDEO OUT COMPONENT VIDEO B B DIGITAL OPTICAL CD/ SACD IN MD/DAT OUT MD/DAT IN TV/SAT IN DVD/LD IN COAXIAL ANTENNA CONTROL A1 II CTRL S STATUS IN S-VIDEO IN S-VIDEO IN CTRL S OUT CTRL S OUT S-VIDEO OUT S-VIDEO IN S-VIDEO OUT CTRL S IN COMPONENT VIDEO AM VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT Y y L FM 75 COAXIAL MONITOR PB/B - Y y SIGNAL GND R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN TV/SAT DVD/LD VIDEO 2 VIDEO 1 PR/R - Y TV/SAT IN DVD/LD IN MONITOR OUT SURR BACK L L L L CENTER L CENTER L To the front panel IN R IN OUT R IN OUT R IN R PHONO CD/SACD MD/DAT TAPE FRONT SURROUND WOOFER SUB R FRONT SURROUND SURR BACK SUB WOOFER R OUT SUB WOOFER MULTI CH IN 2 MULTI CH IN 1 2ND ROOM PRE OUT C B B INPUT OUTPUT VIDEO IN VIDEO OUT B B INPUT OUTPUT VIDEO IN VIDEO OUT C OUT IN OUT IN C INPUT VIDEO IN C B C Camcorder or video game AUDIO IN AUDIO OUT L AUDIO IN AUDIO OUT L R R VCR VCR TV monitor* * For STR-DE985, you can display the SURR, LEVEL, EQ, SET UP and CUSTOMIZE parameters and selected sound field by pressing ON SCREEN. Note on video component hookups You can connect your TV's audio output jacks to the TV/SAT AUDIO IN jacks on the receiver and apply sound effects to the audio from the TV. In this case, do not connect the TV's video output jack to the TV/SAT VIDEO IN jack on the receiver. If you are connecting a separate TV tuner (or satellite tuner), connect both the audio and video output jacks to the receiver as shown above. If you have a TV, satellite tuner, DVD player, or LD player with COMPONENT VIDEO (Y, B-Y, R-Y) output jacks and a monitor with COMPONENT VIDEO input jacks, use a video cord (not supplied) to connect to the receiver. Tip When using the S-video jacks instead of the video jacks, your monitor must also be connected via an S-video jack. S-video signals are on a separate bus from the video signals and will not be output through the video jacks. Notes * If you make COMPONENT VIDEO connections, nothing is displayed on the on-screen display (STR-DE985 only). * On this receiver, the component video signals are not compatible with S-video signals or video signals. 10US www..com Digital component hookups Hooking Up the Components Connect the digital output jacks of your DVD player and satellite tuner (etc.) to the receiver's digital input jacks to bring the multi channel surround sound of a movie theater into your home. To fully enjoy multi channel surround sound, five speakers (two front speakers, two surround speakers, and a center speaker) and a sub woofer are required. For 6.1 channel surround sound, you will also need a surround back speaker (STR-DE985) or refer page 18 (STR-DE885). You can also connect an LD player with an RF OUT jack via an RF demodulator, like the Sony MOD-RF1 (not supplied). Note You cannot connect an LD player's DOLBY DIGITAL RF OUT jack directly to this unit's digital input jacks. You must first convert the RF signal to either an optical or coaxial digital signal. For details, see "Troubleshooting" on page 58. TV or satellite tuner OUTPUT VIDEO OUT AUDIO OUT OUTPUT DIGITAL OPTICAL L R D B DIGITAL OPTICAL CD/ SACD IN MD/DAT OUT MD/DAT IN TV/SAT IN DVD/LD IN COAXIAL CO ANTENNA CTRL S STATUS IN S-VIDEO IN S-VIDEO IN CTRL S OUT CTRL S OUT S-VIDEO OUT S-VIDEO IN S-VIDEO OUT CTRL S IN COMPONENT V AM VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT Y y L FM 75 COAXIAL MONITOR PB/B - Y y SIGNAL GND R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN PR/R - Y TV/SAT IN DVD/LD IN TV/SAT DVD/LD VIDEO 2 VIDEO 1 L L L L CENTER L CENTER L IN R IN OUT R IN OUT R IN R To the front panel PHONO CD/SACD MD/DAT TAPE FRONT SURROUND WOOFER SUB R FRONT SURROUND SURR BACK SUB WOOFER R OUT MULTI CH IN 2 MULTI CH IN 1 2ND ROOM E OUTPUT DIGITAL COAXIAL B OUTPUT VIDEO OUT AUDIO OUT L R DVD or LD player (etc.) Camcorder or video game D 11US www..com Connect the digital output jacks of your MD or DAT deck to the receiver's digital input jack and connect the digital input jacks of your MD or DAT deck to the receiver's digital output jack. These connections allow you to make digital recordings of TV broadcasts, etc. MD or DAT deck DIGITAL OPTICAL IN INPUT OUTPUT LINE LINE L OUT R D c L IN D c A c A c IN OUT OUT IN DIGITAL OPTICAL CD/ SACD IN MD/DAT OUT MD/DAT IN TV/SAT IN DVD/LD IN COAXIAL CO ANTENNA CTRL S STATUS IN S-VIDEO IN S-VIDEO IN CTRL S OUT CTRL S OUT S-VIDEO OUT S-VIDEO IN S-VIDEO OUT CTRL S IN COMPONENT V AM VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT Y y L FM 75 COAXIAL MONITOR PB/B - Y y SIGNAL GND R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN PR/R - Y TV/SAT IN DVD/LD IN TV/SAT DVD/LD VIDEO 2 VIDEO 1 L L L CENTER L CENTER L R IN OUT R IN OUT R IN R PHONO CD/SACD MD/DAT TAPE FRONT SURROUND WOOFER SUB R FRONT SURROUND SURR BACK SUB WOOFER R OUT MULTI CH IN 2 MULTI CH IN 1 2ND ROOM Notes * You cannot make digital recordings when the source is a multi channel digital source. * All the OPTICAL and COAXIAL jacks are compatible with 96 kHz, 48 kHz, 44.1 kHz and 32 kHz sampling frequencies. * It is not possible to record analog signals to the components connected to MD/DAT (STR-DE985) or MD/TAPE (STR-DE885) and VIDEO jacks with only digital connections. To record analog signals, make analog connections. To record digital signals, make digital connections. * The sound is not output when you play a SACD disc on the SACD player connected to the CD/SACD OPTICAL IN jack on this unit. Connect to the analog input jacks (CD/SACD IN jacks). Refer to the operating instructions supplied with the SACD player. 12US www..com Multi channel input hookups Hooking Up the Components Although this receiver incorporates a multi channel decoder, it is also equipped with multi channel input jacks. These connections allow you to enjoy multi channel software encoded in formats other than Dolby Digital and DTS. If your DVD player is equipped with multi channel output jacks, you can connect them directly to the receiver to enjoy the sound of the DVD player's multi channel decoder. Alternatively, the multi channel input jacks can be used to connect an external multi channel decoder. To fully enjoy multi channel surround sound, five speakers (two front speakers, two surround speakers, and a center speaker) and a sub woofer are required. For 6.1 channel surround sound, you will also need a surround back speaker (STR-DE985) or refer page 18 (STR-DE885). Refer to the operating instructions supplied with your DVD player, multi channel decoder, etc., for details on the multi channel hookups. Notes * When using the connections described below, adjust the level of the surround speakers and sub woofer from the DVD player or multi channel decoder. * See page 17 for details on speaker system hookup. DIGITAL OPTICAL CD/ SACD IN MD/DAT OUT MD/DAT IN TV/SAT IN DVD/LD IN COAXIAL CO ANTENNA CTRL S STATUS IN S-VIDEO IN S-VIDEO IN CTRL S OUT CTRL S OUT S-VIDEO OUT S-VIDEO IN S-VIDEO OUT CTRL S IN + COMPONENT V AM VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT Y y L FM 75 COAXIAL MONITOR PB/B - Y - y SIGNAL GND R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN PR/R - Y TV/SAT IN DVD/LD IN TV/SAT DVD/LD VIDEO 2 VIDEO 1 L L L L L CENTER L CENTER L IN R IN OUT R IN OUT R IN R R PHONO CD/SACD MD/DAT TAPE FRONT SURROUND WOOFER SUB R FRONT SURROUND SURR BACK SUB WOOFER R OUT MULTI CH IN 2 MULTI CH IN 1 2ND ROOM MULTI CH IN 1* MULTI CH IN (STR-DE885) MULTI CH IN 2 (STR-DE985) L R AAFF F FRONT SURROUND CENTER MULTI CH OUT SURROUND BACK SUB WOOFER DVD player, Multichannel decoder, etc. * STR-DE985 only 13US www..com Other hookups CTRL S (STATUS) IN/OUT* H CONTROL A1 H DIGITAL OPTICAL CD/ SACD IN MD/DAT OUT MD/DAT IN TV/SAT IN DVD/LD IN COAXIAL ANTENNA CONTROL A1 II CTRL S STATUS IN S-VIDEO IN S-VIDEO IN CTRL S OUT CTRL S OUT S-VIDEO OUT S-VIDEO IN S-VIDEO OUT CTRL S IN COMPONENT VIDEO AM VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT Y y L FM 75 COAXIAL MONITOR PB/B - Y y SIGNAL GND R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN TV/SAT DVD/LD VIDEO 2 VIDEO 1 PR/R - Y TV/SAT IN DVD/LD IN MONITOR OUT SURR BACK L L L L CENTER L CENTER L IN R IN OUT R IN OUT R IN R FRONT SURROUND PHONO CD/SACD MD/DAT TAPE SUB WOOFER R FRONT SURROUND SURR BACK SUB WOOFER R OUT SUB WOOFER MULTI CH IN 2 MULTI CH IN 1 2ND ROOM PRE OUT A 2ND ROOM OUT* * STR-DE985 only CONTROL A1 hookup * If you have a Sony CD changer with a COMMAND MODE selector * If you have a CONTROL A1 compatible Sony CD player, SACD player, tape deck, or MD deck Use a monaural mini-plug cord (not supplied) to connect the CONTROL A1 jack on the CD player, SACD player, tape deck, or MD deck to the CONTROL A1 jack on the receiver. Refer to "CONTROL A1 control system" on page 46 and the operating instructions supplied with your CD player, SACD player, tape deck, or MD deck for details. Note If your CD changer's COMMAND MODE selector can be set to CD 1, CD 2, or CD 3, be sure to set the command mode to "CD 1" and connect the changer to the CD jacks on the receiver. However, if you have a Sony CD changer with VIDEO OUT jacks, set the command mode to "CD 2" and connect the changer to the VIDEO 2 jacks on the receiver. If you make CONTROL A1 connections from the receiver to an MD deck that is also connected to a computer, do not operate the receiver while using the "Sony MD Editor" software. This may cause a malfunction. 14US www..com S-LINK CONTROL (STR-DE985 only) S hookup TV AUDIO OUT S-LINK OUT IN VIDEO IN If you have a S-LINK CONTROL Scompatible Sony TV, satellite tuner, monitor, DVD player or VCR, use an audio/video/ control S connecting cord (supplied) or a monaural mini-plug cord (supplied) to connect the CTRL S (STATUS) IN (for TV, satellite tuner, or monitor) or OUT (for VCR, etc.) jack on the receiver to the appropriate S-LINK jack on the respective component. Refer to the operating instructions supplied with your TV, satellite tuner, monitor, VCR, etc., for details. The following illustration is an example of S-LINK CONTROL S hookups between the receiver, a TV, a VCR, and a DVD player. When your TV is connected to the receiver as shown below, the TV input mode will change to video input whenever you turn on the receiver. When you connect the receiver as shown below, input mode of the receiver changes to VIDEO 1 or DVD/LD whenever you play your VCR or DVD. The following connections will also change the input mode of the receiver to TV whenever you operate your TV. Receiver H G* Hooking Up the Components CTRL S STATUS IN S-VIDEO IN S-VIDEO IN CTRL S OUT CTRL S OUT S-VIDEO OUT S-VIDEO IN S-VIDEO OUT CTRL S IN VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT MONITOR L R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN TV/SAT DVD/LD VIDEO 2 VIDEO 1 G VCR 1 OUTPUT VIDEO OUT S-LINK IN AUDIO OUT G DVD player OUTPUT VIDEO OUT S-LINK IN AUDIO OUT * Pull the video cord away from the supplied audio/ video/control S cable. Note Refer to the operating instructions supplied with your TV for details regarding the operations you can control from your TV. 2ND ROOM hookup (STR-DE985 only) You can use the 2ND ROOM OUT jacks to output the audio signals of the selected component to a stereo amplifier located in another room (page 28). continued 15US www..com Other hookups (continued) Caution Connecting the AC power cord AC power cord Make sure that the total power consumption of the component(s) connected to the receiver's AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet. SURROUND CENTER SURR BACK + L + - RS IMPEDANCE USE 8 - 16 - AC OUTLET b To a wall outlet AC OUTLET* * The configuration, shape, and number of AC outlets vary according to the model and country to which the receiver is shipped. Before connecting the AC power cord of this receiver to a wall outlet, connect the speaker system to the receiver (page 17). Connect the AC power cord(s) of your audio/ video components to a wall outlet. If you connect other audio/video components to the AC OUTLET(s) on the receiver, the receiver will supply power to the connected component(s), allowing you to turn the whole system on or off when you turn the receiver on or off. 16US Hooking Up and Setting Up the Speaker System www..com Speaker system hookups Required cords A Speaker cords (not supplied) (+) (-) (+) (-) Hooking Up and Setting Up the Speaker System B Monaural audio cord (not supplied) Black Front speaker A (R) Front speaker A (L) Black Surround speaker (R) Surround speaker (L) Surround back speaker* E A eE A eE A eE A eE A e FRONT A CONTROL A1 II S-VIDEO IN CTRL S OUT CTRL S OUT S-VIDEO OUT S-VIDEO IN S-VIDEO OUT CTRL S IN SURROUND CENTER SURR BACK + R L R + L + COMPONENT VIDEO Y VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT MONITOR - SPEAKERS - IMPEDANCE USE 8 - 16 - L R AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN PB/B - Y DVD/LD VIDEO 2 VIDEO 1 PR/R - Y TV/SAT IN DVD/LD IN MONITOR OUT SURR BACK R L L L CENTER L CENTER L + - + - R L FRONT B R R RONT SURROUND WOOFER SUB R FRONT SURROUND SURR BACK SUB WOOFER R OUT SUB WOOFER MULTI CH IN 2 MULTI CH IN 1 2ND ROOM PRE OUT SPEAKERS AC OUTLET IMPEDANCE USE 8 - 16 B INPUT AUDIO IN A A A E eE e E e Active sub woofer Front speaker B** (R) Front speaker B** (L) Center speaker * STR-DE985 only. ** If you have an additional front speaker system, connect them to the SPEAKERS FRONT B terminals. You can select the front A or B speakers using the SPEAKERS A/B button (page 27). continued 17US www..comhookup (continued) Speaker system Examples of poor conditions of the speaker cord Notes * Twist the stripped ends of the speaker cords about 10 mm (2/3 inch). Be sure to match the speaker cord to the appropriate terminal on the components: + to + and - to -. If the cords are reversed, the sound will be distorted and will lack bass. * If you use speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. SURR BACK hookup (STR-DE885 only) Stripped speaker cord is touching another speaker terminal. The receiver lets you enjoy 6.1 channel surround sound when you connect the receiver's SURR BACK jack to the INPUT jack on another power amplifier with a monaural audio cord. For details on the use of sound field, see page 33. Tip Stripped cords are touching each other due to excessive removal of insulation. After connecting all the components, speakers, and AC power cord, output a test tone to check that all the speakers are connected correctly. For details on outputting a test tone, see page 25. To enjoy the 6.1 channel surround sound, set the SURR BACK parameter to "LARGE" or "SMALL" (page 21). To avoid short-circuiting the speakers Short-circuiting of the speakers may damage the receiver. To prevent this, make sure to take the following precautions when connecting the speakers. Make sure the stripped ends of each speaker cord does not touch another speaker terminal, the stripped end of another speaker cord, or the metal parts of the receiver. If no sound is heard from a speaker while outputting a test tone or a test tone is output from a speaker other than the one whose name is currently displayed on the receiver, the speaker may be short-circuited. If this happens, check the speaker connection again. To avoid damaging your speakers Make sure that you turn down the volume before you turn off the receiver. When you turn on the receiver, the volume remains at the level you turn off the receiver. 18US www..com Performing initial setup operations Performing initial setup operations Before using your receiver for the first time, adjust SET UP parameters so that the receiver correspond to your system. For the adjustable parameters, see the table on page 66. See pages 20-25 for speaker settings. Once you have hooked up the speakers and turned on the power, clear the receiver's memory. Then specify the speaker parameters (size, position, etc.) and perform any other initial setup operations necessary for your system. Tip Hooking Up and Setting Up the Speaker System To check the audio output during settings (to set up while outputting the sound), check the connection (page 25). Multi channel surround setup For the best possible surround sound, all speakers should be the same distance from the listening position (A). However, the receiver lets you to place the center speaker up to 1.5 meters (5 feet) closer (B), the surround speakers up to 4.5 meters (15 feet) closer (C) and the surround back speakers up to 4.5 meters (15 feet) closer (D) to the listening position. The front speakers can be placed from 1.0 to 12.0 meters (3 to 40 feet) from the listening position (A). You can place the surround speakers either behind you or to the side, depending on the shape of your room (etc.). continued Clearing the receiver's memory Before using your receiver for the first time, or when you want to clear the receiver's memory, do the following. 1 Turn off the receiver. 2 Hold down ?/1 for 5 seconds. "MEMORY CLEARING", then "MEMORY CLEARED" appears in the display and all of the following items are reset or cleared: * All preset stations are reset or cleared. * All sound field parameters are reset to their factory settings. * All index names (of preset stations and program sources) are cleared. * All SET UP and CUSTOMIZE parameters are reset to their factory settings. * The sound field memorized for each program source and preset stations are cleared. * The master volume is set to VOLUME MIN. 19US www..com Multi channel surround setup (continued) When placing surround speakers to your side Specifying the speaker parameters B A 45 A 1 Press SET UP. 2 Press or to select the parameter you want to adjust. 3 Turn the jog dial to select the setting you want. C C 90 The setting is entered automatically. 4 Repeat steps 2 and 3 until you have set all of the parameters that follow. Initial settings D 20 When placing surround speakers behind you B A 45 A Parameter Initial setting FRONT CENTER SURROUND SURR BACK SUB WOOFER SURR POSI.3) SURR HEIGHT3) SURR BACK HGT.3) FRONT XX.X feet3) LARGE LARGE LARGE LARGE1)/NO2) YES SIDE LOW LOW 16 feet 16 feet 16 feet 16 feet 16 feet feet STD (120 Hz) STD (120 Hz) STD (120 Hz) STD (120 Hz) STD (120 Hz) NORMAL C 90 C D 20 CENTER XX.X feet3) SURROUND XX.X feet3) SURR BACK XX.X feet3) SUB WOOFER XX.X feet3) DISTANCE UNIT3) FRONT SP > XXX Hz3) CENTER SP > XXX Hz3) SURROUND SP > XXX Hz3) SURR BACK SP > XXX Hz3) LFE HIGH CUT > XXX Hz3) S.W PHASE3) Tip When you set up the surround back speaker, set the speaker at least 1 meter behind the listening position. It is recommended to place the speaker at an equal distance from the surround left and right speakers. If there is no space behind the listening position, set the speaker above the listening position by placing it on a stand or hanging it from the ceiling. To prevent speaker damage or injury in case the speaker falls, make sure that it is properly fixed in place. Note Do not place the center speaker farther away from the listening position than the front speakers. 1) STR-DE985 only 2) STR-DE885 only 3) You can set this parameter only when you set "MENU EXPAND" to "ON" in the CUSTOMIZE menu (page 44). 20US www..com (FRONT) x Front speaker size * If you connect large speakers that will effectively reproduce bass frequencies, select "LARGE". Normally, select "LARGE". * If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. * When the front speakers are set to "SMALL", the center, surround, and surround back speakers are also automatically set to "SMALL" (unless previously set to "NO"). x Center speaker size (CENTER) * If you connect a large speaker that will effectively reproduce bass frequencies, select "LARGE". Normally, select "LARGE". However, if the front speakers are set to "SMALL", you cannot set the center speaker to "LARGE". * If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the center channel bass frequencies from the front speakers (if set to "LARGE") or sub woofer.*1 * If you do not connect a center speaker, select "NO". The sound of the center channel will be output from the front speakers.*2 x Surround speaker size (SURROUND) * If you connect large speakers that will effectively reproduce bass frequencies, select "LARGE". Normally, select "LARGE". However, if the front speakers are set to "SMALL", you cannot set the surround speakers to "LARGE". * If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the surround channel bass frequencies from the sub woofer or other "LARGE" speakers. * If you do not connect surround speakers, select "NO".*3 Tip *1-*3 correspond to the following Dolby Pro Logic modes *1 NORMAL *2 PHANTOM *3 3 STEREO x Surround back speaker size (SURR BACK) Hooking Up and Setting Up the Speaker System You can set this parameter only when you make SURR BACK hookup (STR-DE885) (page 18) or connect a surround back speaker (STR-DE985) (page 17). * If you connect a large speaker that will effectively reproduce bass frequencies, select "LARGE". Normally, select "LARGE". However, if the front speakers are set to "SMALL", you cannot set the surround back speaker to "LARGE". * If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the center channel bass frequencies from the front speakers (if set to "LARGE") or sub woofer. * If you do not make SURR BACK hookup (STR-DE885) or connect a surround back speaker (STR-DE985), select "NO". Tip Internally, the LARGE and SMALL settings for each speaker determine whether or not the internal sound processor will cut the bass signal from that channel. When the bass is cut from a channel, the bass redirection circuitry sends the corresponding bass frequencies to the sub woofer or other "LARGE" speakers. However, since bass sounds have a certain amount of directionality, it is best not to cut them, if possible. Therefore, even when using small speakers, you can set them to "LARGE" if you want to output the bass frequencies from that speaker. On the other hand, if you are using a large speaker, but prefer not to have bass frequencies output from that speaker, set it to "SMALL". If the overall sound level is lower than you prefer, set all speakers to "LARGE". If there is not enough bass, you can use the equalizer to boost the bass levels. To adjust the equalizer, see page 38. continued 21US www..com Multi channel surround setup (continued) x Sub woofer selection (SUB WOOFER) * If you connect a sub woofer, select "YES". * If you do not connect a sub woofer, select "NO". This activates the bass redirection circuitry and outputs the LFE signals from other speakers. * In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend setting the sub woofer's cut off frequency as high as possible. Advance Settings x Surround speaker height (SURR HEIGHT)*/Surround back speaker height (SURR BACK HGT.)** This parameter lets you specify the height of your surround and surround back speaker(s) for proper implementation of the Digital Cinema Sound surround modes. Refer to the illustration below. * Select "LOW" if the location of your surround speakers corresponds to section A. * Select "HIGH" if the location of your surround speakers corresponds to section B. The parameters below are for the advanced speaker settings. They appear in the display window only when you set "MENU EXPAND" to "ON" in the CUSTOMIZE menu (page 44). x Surround speaker position (SURR POSI.)* B 60 A 30 B A This parameter lets you specify the location of your surround speakers for proper implementation of the Digital Cinema Sound surround modes. Refer to the illustration below. * Select "SIDE" if the location of your surround speakers corresponds to section A. * Select "MIDDLE" if the location of your surround speakers corresponds to section B. * Select "BEHIND" if the location of your surround speakers corresponds to section C. This parameter is available only when the surround back speaker size is set to "NO". * These parameters are not available when "Surround speaker size (SURROUND)" is set to "NO". ** This parameter is not available when "Surround back speaker size (SURR BACK)" is set to "NO". 90 A B C 20 60 30 C B A 22US Tip www..com The surround/surround back speaker position parameter is designed specifically for implementation of the Digital Cinema Sound modes with virtual elements. With the Digital Cinema Sound modes, speaker position is not as critical as other modes. All modes with virtual elements were designed under the premise that the surround speaker would be located behind the listening position, but presentation remains fairly consistent even with the surround speakers positioned at a rather wide angle. However, if the speakers are pointing towards the listener from the immediate left and right of the listening position, the sound fields with virtual elements will not be effective unless the surround speaker position parameter is set to "SIDE". Nevertheless, each listening environment has many variables, like wall reflections, and you may obtain better results using "BEHIND" or "MIDDLE" if your speakers are located high above the listening position, even if they are to the immediate left and right. Therefore, although it may result in a setting contrary to the "Surround speaker position" explanation, we recommend that you playback multi channel surround encoded software and listen to the effect each setting has on your listening environment. Choose the setting that provides a good sense of spaciousness and that best succeeds in forming a cohesive space between the surround sound from the surround speakers and the sound of the front speakers. If you are not sure which sounds best, select "BEHIND" and then use the speaker distance parameter and speaker level adjustments to obtain proper balance. x Surround speaker distance (SURROUND XX.X feet) Set the distance from your listening position to the surround speakers. Surround speaker distance should be set from a distance equal to the front speaker distance (A on page 20) to a distance 4.5 meters (15 feet) closer to your listening position (C on page 20). When this range is exceeded, the display flashes. If you make the setting while the display flashes, you cannot fully enjoy the surround effect. x Surround back speaker distance (SURR BACK XX.X feet) Hooking Up and Setting Up the Speaker System Set the distance from your listening position to the surround back speaker. Surround back speaker distance should be set from a distance equal to the front speaker distance (A on page 20) to a distance 4.5 meters (15 feet) closer to your listening position (D on page 20). When this range is exceeded, the display flashes. If you make the setting while the display flashes, you cannot fully enjoy the surround effect. x Sub woofer distance (SUB WOOFER XX.X feet) Set the distance from your listening position to the sub woofer. continued x Front speaker distance (FRONT XX.X feet) Set the distance from your listening position to the front speakers (A on page 20). x Center speaker distance (CENTER XX.X feet) Set the distance from your listening position to the center speaker. Center speaker distance should be set from a distance equal to the front speaker distance (A on page 20) to a distance 1.5 meters (5 feet) closer to your listening position (B on page 20). When this range is exceeded, the display flashes. If you make the setting while the display flashes, you cannot fully enjoy the surround effect. 23US www..com Multi channel surround setup (continued) Tip x Center speaker crossover frequency (CENTER SP > XXX Hz) The receiver allows you to input the speaker position in terms of distance. However, it is not possible to set the center speaker further than the front speakers. Also, the center speaker cannot be set more than 1.5 meters (5 feet) closer than the front speakers. Likewise, the surround and surround back speakers can not be set farther away from the listening position than the front speakers. And they can be no more than 4.5 meters (15 feet) closer. This is because incorrect speaker placement is not conducive to enjoy surround sound. Please note that, setting the speaker distance closer than the actual location of the speakers will cause a delay in the output of the sound from that speaker. In other words, the speaker will sound like it is farther away. For example, setting the center speaker distance 1~2 m (3~6 feet) closer than the actual speaker position will create a fairly realistic sensation of being "inside" the screen. If you cannot obtain a satisfactory surround effect because the surround speakers are too close, setting the surround speaker distance closer (shorter) than the actual distance will create a larger sound stage. Adjusting these parameter while listening to the sound often results in much better surround sound. Give it a try! Lets you adjust the center speaker bass crossover frequency when the center speaker is set to "SMALL". x Surround speaker crossover frequency (SURROUND SP > XXX Hz) Lets you adjust the surround speaker bass crossover frequency when the surround speakers are set to "SMALL". x Surround back speaker crossover frequency (SURR BACK SP > XXX Hz) Lets you adjust the surround back speaker bass crossover frequency when the surround back speaker is set to "SMALL". Note You can set the FRONT, CENTER, SURROUND and SURR BACK parameters when the speaker size is set to "SMALL". x LFE high cut filter (LFE HIGH CUT > XXX Hz) x Distance unit (DISTANCE UNIT) Lets you select the cut off frequency of the LFE channel high cut filter. Normally, select "STD". When using a passive sub woofer powered by a separate power amplifier, it may be better to change the cut off frequency. x Sub woofer phase polarity (S.W PHASE) Lets you select either feet or meters as the unit of measure for setting distances. x Front speaker crossover frequency (FRONT SP > XXX Hz) Lets you adjust the front speaker bass crossover frequency when the front speakers are set to "SMALL". Set the sub woofer phase polarity. There is usually no problem when the sub woofer phase polarity is set to "NORMAL". However, depending on the type of front speakers, the position of the sub woofer, and the cut-off frequency of the sub woofer, setting the phase polarity to "REVERSE" may produce better bass. Besides bass reproduction, the richness and tightness of the overall sound may also be affected. While listening from the main listening position, select the setting that best suits your environment. 24US www..com Adjusting the speaker level 5 Press TEST TONE again to turn off the test tone. Tips Use the remote while seated in your listening position to adjust the level of each speaker. Note The receiver incorporates a new test tone with a frequency centered at 800 Hz for easier speaker level adjustment. * You can adjust the level of all speakers at the same time. Turn MASTER VOLUME on the main unit or press MASTER VOL +/- on the remote. * In step 3, you can select the mode using the jog dial on the receiver. Notes Hooking Up and Setting Up the Speaker System 1 Press ?/1 to turn on the receiver. 2 Press TEST TONE on the remote. "TEST TONE" appears in the display and you will hear the test tone from each speaker in sequence. 3 To change the test tone mode, press B/b to select the mode you want. Mode The test tone output * The adjusted value are shown in the display during adjustment. * Although these adjustments can also be made via the front panel using the LEVEL menu (when the test tone is output, the receiver switches to the LEVEL menu automatically), we recommend you follow the procedure described above and adjust the speaker levels from your listening position using the remote. NORMAL PHASE The test tone is output from each speaker in sequence. The test tone is output from two speakers at a time in sequence. (There is no sound output from the sub woofer.) You can also adjust the balance between speakers. Checking the connections After connecting all of your components to the receiver, do the following to verify that the connections were made correctly. 2CH SWAP* You can adjust the speaker levels while listening to the source (not the test tone). Turn on the connected component, start playback, then turn FUNCTION to select the component (except when connected to the MULTI CH IN** jacks). The sound for the front L/R speakers is output from the surround R/L speakers. You can adjust the level of surround speakers from the listening position. * You cannot select "2CH SWAP" when "2CH ANALOG DIRECT" is selected (page 27). ** For STR-DE985, MULTI CH IN 1 or 2. 1 Press ?/1 to turn on the receiver. 2 Turn on the component that you connected (e.g., CD player or tape deck). 3 Rotate FUNCTION to select the component (program source). 4 Start playing. If you do not obtain normal sound output after performing this procedure, see "Troubleshooting" on page 58 and take the appropriate measures to correct the problem. 4 Adjust the LEVEL parameters so that the level of the test tone from each speaker sounds the same when you are in your main listening position. Press LEVEL to adjust the balance and level of speakers. For details on the LEVEL menu, see page 37. While adjusting, the test tone is output from the speaker whose adjustment is performed. 25US Basic Operations www..com INPUT MODE Press INPUT MODE to select the input mode for your digital components. Each time you press the button, the input mode of the currently selected component switches. Select To Selecting the component FUNCTION control Turn FUNCTION control to select the component you want to use. To select Rotate to light AUTO 2CH VCR Camcorder or video game DVD or LD player TV or satellite tuner Tape deck MD or Tape deck MD or DAT deck CD or SACD player Built in tuner Turntable VIDEO 1* or VIDEO 2* VIDEO 3* DVD/LD* TV/SAT* TAPE (STR-DE985) MD/TAPE (STR-DE885) MD/DAT (STR-DE985) CD/SACD TUNER PHONO COAXIAL FIXED Give priority to digital signals when there are both digital and analog connections. If there are no digital signals, analog is selected. Specify the digital audio signals input to the DIGITAL COAXIAL input jacks. Specify the digital audio signals input to the DIGITAL OPTICAL input jacks. OPTICAL FIXED * VIDEO SELECT INDICATOR lights up when selected. ANALOG 2CH FIXED Specify the analog audio signals input to the AUDIO IN (L/R) jacks. After turning on the component you selected, select the component and play the program source. * After selecting VCR, camcorder, video game, DVD player, or LD player, turn on the TV and set the TV's video input to match the component you selected. When the MULTI CH1) is assigned to a specific function using CUSTOMIZE menu (page 44), the followings are displayed instead of "AUTO 2CH" and "ANALOG 2CH FIXED". Select To AUTO MULTI CH3) MODE (FUNCTION) Press to select and play another video/audio source in combination with the selected component. Each time you press the button, the display changes cyclically as follows: VISUAL: XXXXXX t AUDIO: XXXXXX t Selected component Press MODE (FUNCTION) to display And rotate FUNCTION to select Give priority to digital signals when there are both digital and MULTI CH IN2) connections. If there are no digital signals, MULTI CH IN2) is selected. Specify the analog audio signals input to the MULTI CH IN2) jacks. MULTI CH FIXED4) 1) 2) 3) 4) For STR-DE985, MULTI CH 1 or 2. For STR-DE985, MULTI CH IN 1 or 2. For STR-DE985, AUTO MULTI CH 1 or 2. For STR-DE985, MULTI CH 1 (or 2) FIXED. Note VISUAL: XXXXXX Any video source to enjoy with the audio from the selected component Any audio source to enjoy with the video from the selected component When INPUT MODE is set to "AUTO 2CH" or "AUTO MULTI CH", the receiver may not operate correctly. In this case, set the INPUT MODE manually. AUDIO: XXXXXX 26US www..com MULTI/2CH ANALOG DIRECT Press MULTI/2CH ANALOG DIRECT to enjoy the audio source connected to the MULTI CH IN1) jacks or analog 2 channel input jacks. Only volume control and the front speaker balance can be adjusted when set to 2CH ANALOG DIRECT. When set to MULTI CH DIRECT2), you can adjust balance and level of all the speakers. When this function is on, the surround effects are turned off. Select To Each time you press the button, the display changes cyclically as follows: SPEAKER A t SPEAKER B t SPEAKER OFF To drive Select Speaker System A (Connected to the SPEAKERS FRONT A terminals) Speaker System B (Connected to the SPEAKERS FRONT B terminals) SPEAKER A SPEAKER B Basic Operations MULTI CH DIRECT2) Enjoy the audio source connected to the MULTI CH IN1) jacks. MULTI CH IN1) indicator lights up in the display. This mode is suitable for enjoying high quality analog source. Enjoy the audio source connected to analog 2 channel jacks. This mode is suitable for enjoying high quality analog source. When you select "SPEAKER OFF", no sound will be output from your speakers and "SP. OFF" lights up in the display. 2CH ANALOG DIRECT MUTING Press MUTING to mute the sound. The muting function is canceled when you turn the power on or turn the MASTER VOLUME clockwise to turn the volume up. You can also press MUTING again to cancel the muting function. 1) For STR-DE985, MULTI CH IN 1 or 2. 2) For STR-DE985, MULTI CH 1 (or 2) DIRECT. MULTI CHANNEL DECODING indicator This indicator lights up when the unit is decoding signals recorded in a multi channel format. PHONES Use to connect headphones. When the headphones are connected, speaker output is automatically canceled and "SP. OFF" lights up in the display. When the headphones are connected, selectable sound fields are HEADPHONE (2CH), HEADPHONE (DIRECT), HEADPHONE (MULTI)3) and HEADPHONE (THEATER) (page 32). Note SPEAKERS A/B Press SPEAKERS A/B button to output the sound from the speakers connected to the SPEAKERS FRONT terminals. When "HEADPHONE (MULTI)3)" appears in the display while the headphones are connected, only the front L/R signals of the multi channels are output from the headphones. 3) For STR-DE985, HEADPHONE (MULTI 1) or HEADPHONE (MULTI 2). 27US www..com Listening to the sound in another room Changing the display DISPLAY Each time you press DISPLAY, the display changes cyclically as follows: (STR-DE985 only) g Index name of the component* t Selected component t Sound field applied to the program source When the tuner is selected 2ND ROOM OUT AUDIO IN Index name of the preset station* t Frequency t Sound field applied to the band or the preset station * Index name appears only when you have assigned one to the component or preset station (page 42). Index name does not appear when only blank spaces have been entered, or it is the same as the function. Stereo amplifier SPEAKERS DIMMER Press 2ND ROOM repeatedly to select the analog audio signals for output to a stereo amplifier in another room. For details on the connection, see page 15. Each time you press the button, the audio source changes cyclically as follows: SOURCE*1 t TAPE t MD/DAT t CD/SACD t TUNER *1 The audio signals of the current function is output. Press DIMMER repeatedly to adjust the brightness of the display (5 steps). When set to the dimmest setting, the display and the blue LED are turned off. However, when you press any button, the display becomes the brightest setting temporary. * Even if 2ND ROOM is set to "SOURCE", the sound from front speakers is not output when MULTI/2CH ANALOG DIRECT is set to MULTI CH 1 or 2 DIRECT. * Only signals from components connected to the analog input jacks are output through the 2ND ROOM OUT jacks. No signals are output from components connected to only the digital input jacks. 28US Enjoying Surround Sound www..com You can take advantage of surround sound simply by selecting one of the receiver's preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. You can also customize the sound fields to obtain the sound you want by changing the various surround parameters. To fully enjoy surround sound, you must register the number and location of you speakers. See "Multi channel surround setup" starting from page 19 to set the speaker parameters before enjoying surround sound. Sound field Display Normal Surround Cinema Studio EX A Cinema Studio EX B Cinema Studio EX C Mono Movie Stereo Movie Digital Concert Hall A Digital Concert Hall B Church Opera House Jazz Club Disco/Club Live Concert Arena Stadium Game Headphone (2CH) Headphone Direct Headphone Multi Headphone Theater NORMAL SURROUND CINEMA STUDIO EX A DS C CINEMA STUDIO EX B DS C CINEMA STUDIO EX C DS C MONO MOVIE STEREO MOVIE D. CONCERT HALL A D. CONCERT HALL B Enjoying Surround Sound CHURCH OPERA HOUSE JAZZ CLUB DISCO / CLUB LIVE CONCERT ARENA STADIUM GAME HEADPHONE (2CH) HEADPHONE (DIRECT) HEADPHONE (MULTI)1) HEADPHONE THEATER DS C Automatically decoding the input audio signal Press A. DEC. "AUTO DECODING" appears in the display. This mode automatically detects the type of audio signal being input (Dolby Digital, DTS, or standard 2 channel stereo) and performs the proper decoding if necessary. This mode presents the sound as it was recorded/encoded, without adding any effects (e.g. reverberation). However, if there are no low frequency signals (Dolby Digital LFE, etc.) it will generate a low frequency signal for output to the sub woofer. 1) For STR-DE985, HEADPHONE (MULTI 1) or HEADPHONE (MULTI 2). About DCS (Digital Cinema Sound) Selecting a sound field You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. The sound fields with D S mark use DCS C technology. When these sound fields are selected, "Digital Cinema Sound" indicator in the display lights up. In collaboration with Sony Pictures Entertainment, Sony measured the sound environment of their studios and integrated the data of the measurement and Sony's own DSP (Digital Signal Processor) technology to develop "Digital Cinema Sound". In a home theater, "Digital Cinema Sound" simulates an ideal movie theater sound environment based on the preference of the movie director. continued 29US www..com field (continued) Selecting a sound About Cinema Studio EX Enjoying movies with Cinema Studio EX Cinema Studio EX is ideal for enjoying the movie software encoded with multi channel format, such as the Dolby Digital DVD. This mode reproduces the sound characteristics of Sony Pictures Entertainment's studios. Press CINEMA STUDIO EX A, B or C. Cinema Studio EX consists of the following three elements. * Virtual Multi Dimension Creates 5 sets of virtual speakers surrounding the listener from a single pair of actual surround speakers. * Screen Depth Matching In a movie theater, sound seems to come from inside the image reflected on the movie screen. This element creates the same sensation in your listening room by shifting the sound of the front speakers "into" the screen. * Cinema Studio Reverberation Reproduces the reverberations peculiar to a movie theater. Cinema Studio EX is the integrated mode which operates these elements simultaneously. Tip The selected sound field is indicated in the display. x CINEMA STUDIO EX A (Cinema Studio EX A) Reproduces the sound characteristics of the Sony Pictures Entertainment "Cary Grant Theater" cinema production studio. This is a standard mode, great for watching most any type of movie. x CINEMA STUDIO EX B (Cinema Studio EX B) You can select Cinema Studio EX by pressing MODE (SOUND FIELD) repeatedly. Notes Reproduces the sound characteristics of the Sony Pictures Entertainment "Kim Novak Theater" cinema production studio. This mode is ideal for watching science-fiction or action movies with lots of sound effects. x CINEMA STUDIO EX C (Cinema Studio EX C) * The effects provided by the virtual speakers may cause increased noise in the playback signal. * When listening with sound fields that employ the virtual speakers, you will not be able to hear any sound coming directly from the surround speakers. Reproduces the sound characteristics of the Sony Pictures Entertainment scoring stage. This mode is ideal for watching musicals or classic films where music is featured in the soundtrack. 30US www..com Selecting other sound fields x CHURCH (Church) Reproduces the acoustics of a stone church. Press MODE (SOUND FIELD) repeatedly to select the sound field you want. x OPERA HOUSE (Opera House) The current sound field is indicated in the display. x NORMAL SURROUND (Normal Surround) Reproduces the acoustics of an opera house. x JAZZ CLUB (Jazz Club) Reproduces the acoustics of a jazz club. x DISCO / CLUB (Disco/Club) Software with multi channel surround audio signals is played back according to the way it was recorded. Software with 2 channel audio signals is decoded with Dolby Pro Logic to create surround effects. x MONO MOVIE (Mono Movie) Reproduces the acoustics of a discotheque/ dance club. x LIVE CONCERT (Live Concert) Enjoying Surround Sound Reproduces the acoustics of a 300-seat live concert. x ARENA (Arena) Creates a theater like environment from movies with monaural soundtracks. x STEREO MOVIE (Stereo Movie) Reproduces the acoustics of a 1000-seat concert hall. x STADIUM (Stadium) Creates a theater like environment from movies recorded with stereo soundtracks. x D. CONCERT HALL A, B (Digital Concert Hall A, B) Reproduces the feeling of a large open-air stadium. x GAME Reproduces the acoustics of a concert hall using multi-speaker system and 3D sound imaging for software with 2 channel signals like CDs. * D. CONCERT HALL A reproduces the sonic character of the CONCERTGEBOUW in Amsterdam, which is famous for its large sound stage due to its reflectivity. * D. CONCERT HALL B reproduces the sonic character of the MUSIKVEREIN in Vienna, which is famous for its hall resonance and unique reverberative sound. Obtains maximum audio impact from video game software. To turn the surround effect off Press A. DEC or 2CH. continued You can select directly by pressing the buttons on the front panel. 31US www..com field (continued) Selecting a sound When headphones are connected Using only the front speakers (2 Channel Stereo) Press 2CH. You can select the following sound fields only. x HEADPHONE (2CH) (Headphone 2CH) Output the sound in 2 channel (stereo). Standard 2 channel (stereo) sources completely bypass the sound field processing. Multi channel surround formats are downmixed to 2 channel. x HEADPHONE (DIRECT) (Headphone Direct) "2CH STEREO" appears in the display. This mode outputs the sound from the front left and right speakers only. Standard 2 channel (stereo) sources completely bypass the sound field processing. Multi channel surround formats are downmixed to 2 channel. Note Outputs the analog signals without digital processing by the equalizer, sound field, etc. x HEADPHONE (MULTI)1) (Headphone Multi) No sound is output from the sub woofer when "2CH STEREO" is selected. To listen to 2 channel (stereo) sources using the front left and right speakers and a sub woofer, press A. DEC to select "AUTO DECODING". Outputs the front analog signal from MULTI CH IN2) jacks. x HEADPHONE THEATER (Headphone Theater) Allows you to experience a theater like environment while listening through a pair of headphones. 1) For STR-DE985, HEADPHONE (MULTI 1) or HEADPHONE (MULTI 2). 2) For STR-DE985, MULTI CH IN 1 or 2. Tips Enjoying stereo sound in multi channel (Dolby Pro Logic ) The receiver can reproduce the stereo sound in multi channel through Dolby Pro Logic . You can activate the decoder using the CUSTOMIZE menu. For details, see page 44. * The receiver lets you apply the last selected sound field to a program source whenever it is selected (Sound Field Link). For example, if you listen to CD with "JAZZ CLUB" as the sound field, change to a different program source, then return to CD, "JAZZ CLUB" will be applied again. * You can identify the encoding format of program sofware by looking at its packaging. Dolby Digital discs are labeled with the logo, and Dolby Surround encoded programs are labeled with the logo. * When sound signals with a sampling frequency of 96 kHz are input, the sound signals are output in stereo automatically, and the sound field is turned off. 32US www..com Selecting the surround back decoding mode (SURR BACK DECODING) About DVD encoding and playback of Surround EX (6.1 Channel) movies You can select the surround back decoding mode to reproduce the surround back signal and enjoy 6.1 channel surround sound. Press SURR BACK DECODING to select the surround back decoding mode. "SB DECODING XXXXXX" appears in the display and SB DEC indicator lights up. * When set to "AUTO", the receiver performs 6.1 channel matrix decoding only if the 6.1 channel signals decode flag is ON. * When set to "MATRIX", the receiver performs 6.1 channel matrix decoding only if the surround signals are 2 channel, regardless of the 6.1 channel decode flag. * When set to "OFF", the receiver does not perform 6.1 channel matrix decoding. * When the 6.1 channel matrix decoding is performed and the surround back speaker is set to "NO", you can enjoy the surround back signals with virtual 3D technology, even without an actual surround back speaker (the box around SB does not light up). If the surround back speaker is set to "YES", the surround back signals are output through the actual speaker (SB and the box lights up). The Surround EX System used in movie theaters employs a matrix system to produce 6.1 channels from a 5.1 channel film soundtrack. The matrix system reproduces the soundtrack as intended by the filmmaker. All DVD software encoded with Dolby Digital, DTS-ES matrix 6.1, and DTS-ES Discrete 6.1 includes the 5.1 channel soundtrack designed for use in movie theaters. Therefore it is possible to change the soundtrack to the one designed for use in movie theaters. Enjoying Surround Sound To enjoy 6.1 channel surround sound ("VIRTUAL MATRIX 6.1" playback function) * If you do not connect a surround back speaker. You can still enjoy 6.1 channel surround sound even if you do not connect a surround back speaker. Press SURR BACK DECODING when you select "CINEMA STUDIO EX A-C" to use the "VIRTUAL MATRIX 6.1" playback function. The sound charateristics of CINEMA STUDIO and the 3D sound imaging create a virtual surround back speaker, and you can experience the surround effect as if you are in a real theater. Select "AUTO" or "MATRIX" using the SURR BACK DECODING button. * If you connect a surround back speaker. When "NORMAL SURROUND" is selected, press SURR BACK DECODING to select "MATRIX" or "AUTO". This function works only for the multi channel format [3/2]. This function is effective for the following sound fields. * * * * * AUTO DECODING NORMAL SURROUND CINEMA STUDIO EX A-C MONO MOVIE STEREO MOVIE Tip You can also select the surround back decoding mode using the SB DECODING parameter in the CUSTOMIZE menu (page 44). 33US www..com Understanding the multi channel surround displays 12 3 4 5 67 8 9 0 STEREO MONO MEMORY SR SSB OPTCOAXMULTI CH IN 1 2 a DIGITAL ; DTS MPEG SP.OFF D.RANGE EQ PRO LOGIC L.F.E. SW SL L C R SLEEP qh qg qf qd qs qa 7 L.F.E.: Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel. When the sound of the LFE channel signal is actually being reproduced, the bars underneath the letters lights up to indicate the level. Since the LFE signal is not recorded in all parts of the input signal the bar indication will fluctuate (and may turn off) during playback. 8 SW: Lights up when sub woofer selection is set to "YES" (page 22) and the audio signal is output from the SUB WOOFER jacks. 9 Playback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings). When using sound fields like "DIGITAL CONCERT HALL", the receiver adds reverberation based on the source sound. L (Front Left), R (Front Right), C (Center (monaural)), SL (Surround Left), SR (Surround Right), S (Surround (monaural or the surround components obtained by Pro Logic processing)), SB (Surround Back (the surround back components obtained by 6.1 matrix decoding)) Example: Recording format (Front/Surround): 3/2 Output channel: Surround speakers absent Sound Field: AUTO DECODING L SL C R SR 1 OPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal. 2 COAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal. 3 MULTI CH IN (1/2): Lights up when MULTI CH IN (For STR-DE985, MULTI CH IN 1 or 2) is selected. 4 MPEG: Lights up when MPEG signals are input. Note Only the front 2 channels are compatible with MPEG format. Multi channel surround sound is downmixed and output from the front 2 channels. 5 ; DIGITAL: Lights up when the receiver is decoding signals recorded in the Dolby Digital format. 6 PRO LOGIC: Lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. However, this indicator does not light if the center and surround speakers are set to "NO", and "AUTO DECODING" or "NORMAL SURROUND" is selected. Note Pro Logic decoding does not function for MPEG format signals. 34US www..comLights up when using the 0 Tuner indicators: receiver to tune in radio stations, etc. See pages 40-41 for tuner operations. qa SLEEP: Lights up when sleep timer is activated. qs EQ: Lights up when the equalizer functions. qd D.RANGE: Lights up when dynamic range compression is activated. See page 38 to adjust the dynamic range compression. qf DTS: Lights up when DTS signals are input. Note Customizing sound fields By adjusting the surround parameters and the equalization of the front, center, surround, and surround back speakers, you can customize the sound fields to suit your particular listening situation. Once you customize a sound field, the changes are stored in the memory indefinitely. You can change a customized sound field any time by making new adjustments to the parameters. See the tables starting from page 66 for the parameters available in each sound field. Enjoying Surround Sound When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is NOT set to "ANALOG 2CH FIXED" (page 27). qg SP.OFF: Lights up when headphones are inserted or the SPEAKERS A/B button is set to "SPEAKER OFF". qh ;: Lights up when Dolby Digital signals are input. To get the most from multi channel surround sound Position your speakers and do the procedures described in "Multi channel surround setup" starting from page 19 before you customize a sound field. Adjusting the surround parameters The SURR menu contains parameters that let you customize various aspects of the current sound field. The settings are stored individually for each sound field. 1 Start playing a program source encoded with multi channel surround sound. 2 Press SURR. The button lights up and the first parameter is displayed. 3 Press or to select the parameter you want to adjust. you want. 4 Turn the jog dial to select the setting The setting is entered automatically. continued 35US www..com Customizing sound fields (continued) Screen depth (SCREEN DEPTH) Initial settings Parameter Initial setting EFFECT WALL S__I__H1) REVERB S__I__L1) FRONT REVERB1) SCREEN DEPTH1) VIR. SPEAKERS1) (depends on the sound field) Midpoint Midpoint STD (STANDARD) MID ON In a movie theater, sound seems to come from inside the image reflected on the movie screen. This parameter lets you create the same sensation in your listening room by shifting the sound of the front speakers "into" the screen. "DEEP" provides the greatest amount of screen depth. Virtual speakers (VIR. SPEAKERS) Allows you turn to the virtual speakers created by "CINEMA STUDIO EX A, B, C" on or off. 1) You can set this parameter only when you set "MENU EXPAND" to "ON" in the CUSTOMIZE menu (page 44). Effect level (EFFECT) Lets you adjust the "presence" of the current surround effect. Wall type (WALL) Lets you control the level of the high frequencies to alter the sonic character of your listening environment by simulating a softer (S) or harder (H) wall. The midpoint designates a neutral wall (made of wood). Reverberation (REVERB) Lets you control the spacing of the early reflections to simulate a sonically longer (L) or shorter (S) room. The midpoint designates a standard room with no adjustment. Front reverberation (FRONT REVERB) This parameter can be used when "D. CONCERT HALL A, B" is selected. This parameter lets you adjust the amount of reverberations to add to the front signals according to the original reverberations in the source. * To increase front reverberations, select "WET". * To decrease front reverberations, select "DRY". 36US www..com Adjusting the level Front balance (FRONT L_I_R) parameters The LEVEL menu contains parameters that let you adjust the balance and volumes of each speaker. The settings are applied to all sound fields. Lets you adjust the balance between front left and right speakers. Center level (CENTER LEVEL XXX dB) Lets you adjust the level of the center speaker. Surround left level (SURR L LEVEL XXX dB) 1 Start playing a program source encoded with multi channel surround sound. 2 Press LEVEL. The button lights up and the first parameter is displayed. Lets you adjust the level of the surround left speaker. Surround right level (SURR R LEVEL XXX dB) Enjoying Surround Sound 3 Press or to select the parameter you want to adjust. Lets you adjust the level of the surround right speaker. Surround back level (SURR BACK LEVEL XXX dB) 4 Turn the jog dial to select the setting you want. The setting is entered automatically. Initial settings Parameter Initial setting Lets you adjust level of the surround back speaker. Sub woofer level (S. WOOFER LEVEL XXX dB) FRONT L_I_R CENTER LEVEL XXX dB SURR L LEVEL XXX dB SURR R LEVEL XXX dB SURR BACK LEVEL XXX dB S. WOOFER LEVEL XXX dB LFE MIX LEVEL XXX dB D. RANGE COMP. XXX1) 1) Center 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB OFF Lets you adjust the level of the sub woofer. LFE (Low Frequency Effect) mix level (LFE MIX LEVEL XXX dB) 1) You can set this parameter only when you set "MENU EXPAND" to "ON" in the CUSTOMIZE menu (page 44). Lets you attenuate the level of the LFE (Low Frequency Effect) channel output from the sub woofer without effecting the level of the bass frequencies sent to the sub woofer from the front, center or surround channels via the Dolby Digital or DTS bass redirection circuitry. * For LFE mix level, "0 dB" outputs the full LFE signal at the mix level determined by the recording engineer. * To mute the sound of the LFE channel from the sub woofer, select "OFF". However, the low frequency sounds of the front, center, or surround speakers are output from the sub woofer according to the settings made for each speaker in the speaker setup (page 19-22). continued 37US www..com Customizing sound fields (continued) To turn on/off the equalizer Dynamic range compressor (D. RANGE COMP. XXX) Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. We recommend using the "MAX" setting. * To reproduce the sound track with no compression, select "OFF". * To reproduce the sound track with the dynamic range intended by the recording engineer, select "STD". * To compress the dynamic range in small steps to achieve the sound you desire, select "0.1"- "0.9". * To reproduce a dramatic compression of the dynamic range, select "MAX". Note Press EQUALIZER. The EQ indicator in the display lights up when the equalizer is turned on. When you adjust the equalizer using the EQ parameters, the settings are stored separately for each sound field and can be reproduced whenever you turn on the equalizer. Front speaker bass adjustment (Gain/Frequency*) Lets you adjust the gain and frequency of bass. Front speaker midrange adjustment (Gain/Frequency*) Lets you adjust the gain and frequency of midrange. Front speaker treble adjustment (Gain/Frequency*) Lets you adjust the gain and frequency of treble. Center speaker bass adjustment (Gain/Frequency*) Dynamic range compression is possible with Dolby Digital sources only. Adjusting the equalizer The EQ menu lets you adjust the equalization of the front, center, surround, and surround back speakers. The settings are stored individually for each sound field. Lets you adjust the gain and frequency of bass. Center speaker midrange adjustment (Gain/Frequency*) Lets you adjust the gain and frequency of midrange. Center speaker treble adjustment (Gain/Frequency*) 1 Start playing a program source encoded with multi channel surround sound. 2 Press EQ. The button lights up and the first parameter is displayed. Lets you adjust the gain and frequency of treble. * You can set the parameter for frequency only when you set "MENU EXPAND" to "ON" in the CUSTOMIZE menu (page 44). 3 Press or to select the parameter (gain (dB), frequency (Hz)) you want to adjust. 4 Turn the jog dial to select the setting you want. The setting is entered automatically. Gain (dB) Frequency (Hz) 38US www..com Surround speaker bass adjustment (Gain/Frequency*) Resetting customized sound fields to the factory settings Lets you adjust the gain and frequency of bass. Surround speaker treble adjustment (Gain/Frequency*) 1 If the power is on, press ?/1 to turn off the power. Lets you adjust the gain and frequency of treble. Surround back speaker bass adjustment (Gain/Frequency*) 2 Hold down MODE (SOUND FIELD) and press ?/1. "S.F Initialize" appears in the display and all sound fields are reset at once. Lets you adjust the gain and frequency of bass. Surround back speaker treble adjustment (Gain/Frequency*) Enjoying Surround Sound Lets you adjust the gain and frequency of treble. * You can set the parameter for frequency only when you set "MENU EXPAND" to "ON" in the CUSTOMIZE menu (page 44). 39US Receiving Broadcasts www..com Tips Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (page 7). Direct tuning You can enter a frequency of the station you want directly by using the numeric buttons on the supplied remote. For details on the buttons used in this section, see pages 48-57 for remote RM-PG411 and pages 48-55 for remote RM-PP411. * If you do not remember the precise frequency, press TUNING + or TUNING - after entering the value close to the frequency you want. The receiver automatically tunes in the station you want. If the frequency seems to be higher than the entered value, press TUNING +, and if the frequency seems to be lower than the entered value, press TUNING -. * If "STEREO" flashes in the display and the FM stereo reception is poor, press FM MODE to change to monaural (MONO). You will not be able to enjoy the stereo effect, but the sound will be less distorted. To return to stereo mode, press FM MODE again. The tuning scale differs depending on the area code as shown in the following table. For details on area codes, see page 4. Area code FM AM 1 Press TUNER on the remote. The last received station is tuned in. 2 Press FM or AM to select the FM or AM band. U, CA 100 kHz 10 kHz* 3 Press D. TUNING on the remote. 4 Press the numeric buttons to enter the frequency. Example 1: FM 102.50 MHz * The AM tuning scale can be changed (page 62). Automatic tuning If you don't know the frequency of the station you want, you can let the receiver scan all available stations in your area. 1 b0b2b5b0 Example 2: AM 1350 kHz (You don't have to enter the last "0" when the tuning scale is set to 10 kHz.) 1 Rotate FUNCTION to select TUNER. The last received station is tuned in. 1 b3b5b0 If you cannot tune in a station and the entered numbers flash 2 Press FM or AM to select the FM or AM band. Make sure you've entered the right frequency. If not, repeat steps 3 and 4. If the entered numbers still flash, the frequency is not used in your area. 3 Press TUNING + or TUNING -. Press TUNING + to scan from low to high; press TUNING - to scan from high to low. The receiver stops scanning whenever a station is received. When the receiver reaches either end of the band 5 If you've tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception. Scanning is repeated in the same direction. 6 Repeat steps 2 to 5 to receive another station. 4 To continue scanning, press TUNING + or TUNING - again. 40US www..com Preset tuning To change a preset number to another station After you have tuned in stations using Direct Tuning or Automatic Tuning, you can preset them to the receiver. Then you can tune in any of the stations directly by entering its 2-character preset code using the supplied remote. Up to 30 FM or AM stations can be preset. The receiver will also scan all the stations that you have preset. Before tuning to preset stations, be sure to preset them by performing steps on "Presetting radio stations". Do steps 1 to 6 to preset a new station to the number. Tuning to preset stations You can tune the preset stations by either of the following two ways. Scanning the preset stations 1 Rotate FUNCTION to select TUNER. The last received station is tuned in. Presetting radio stations 2 Press PRESET TUNING + or PRESET TUNING - repeatedly to select the preset station you want. Receiving Broadcasts 1 Rotate FUNCTION to select TUNER. The last received station is tuned in. 2 Tune in the station that you want to preset using Direct Tuning (page 40) or Automatic Tuning (page 40). Each time you press the button, the receiver tunes in one preset station at a time, in the corresponding order and direction as follows: nA1A2...A0B1B2...B0N nC0...C2C1N 3 Press MEMORY. "MEMORY" appears in the display for a few seconds. Do steps 4 to 6 before "MEMORY" goes out. Using the preset codes 4 Press SHIFT to select a memory page (A, B or C). Each time you press SHIFT, the letter "A", "B", or "C" appears in the display. Use the supplied remote to perform the following operations. For details on the buttons used in this section, see pages 48-57 for remote RM-PG411 and pages 48-55 for remote RM-PP411. 5 Press PRESET TUNING + or PRESET TUNING - to select a preset number. 1 Press TUNER on the remote. The last received station is tuned in. If "MEMORY" goes out before you press the preset number, start again from step 3. 2 Press SHIFT to select a memory page (A, B, or C), then press the preset number of the station you want using the numeric buttons. 6 Press MEMORY again to store the station. If "MEMORY" goes out before you can store the station, start again from step 3. 7 Repeat steps 2 to 6 to preset another station. 41US Other Operations www..com Naming preset stations and program sources You can enter a name (index name) of up to 8 characters for preset stations and program sources. These names (for example, "VHS") appear in the receiver's display when a station or program source is selected. Note that no more than one name can be entered for each preset station or program source. This function is useful for distinguishing components of the same kind. For example, two VCRs can be specified as "VHS" and "8MM", respectively. It is also handy for identifying components connected to jacks meant for another type of component, for example, a second CD player connected to the MD/DAT jacks (STR-DE985) or MD/TAPE jacks (STR-DE885). 6 Press ENTER. 7 Repeat steps 2 to 6 to assign index name for another station or program source. Note When MULTI CH DIRECT (for STR-DE985, MULTI CH 1 (or 2) DIRECT) is selected, "NAME IN?" does not appear in the display. Recording Before you begin, make sure you've connected all components properly. Recording on an audio tape or MiniDisc You can record on a cassette tape or MiniDisc using the receiver. See the operating instructions of your cassette deck or MD deck if you need help. 1 To name a preset station Rotate FUNCTION to select TUNER, then tune in the preset station you want to create an index name for. 1 Select the component to be recorded. 2 Prepare the component for playing. For example, insert a CD into the CD player. The last station you received is tuned in. If you are not familiar with how to tune in preset stations, see "Tuning to preset stations" on page 41. To name a program source Select the program source (component) to be named. 3 Insert a blank tape or MD into the recording deck and adjust the recording level, if necessary. 4 Start recording on the recording deck, then start playback on the playback component. 2 Press CUSTOMIZE. 3 Press or repeatedly until "NAME IN?" appears in the display. 4 Press ENTER. 5 Create an index name by using the jog dial and or : Turn the jog dial to select a character, then press to move the cursor to the next position. To insert a space Turn the jog dial until a blank space appears in the display. If you've made a mistake 42US Press or repeatedly until the character to be changed flashes, then turn the jog dial to select the right character. Notes www..com Tip * You cannot record a digital audio signal using a component connected to the analog TAPE OUT or MD/DAT OUT jacks (STR-DE985) or the analog MD/TAPE OUT jacks (STR-DE885). To record a digital audio signal, connect a digital component to the DIGITAL MD/DAT OUT jacks (STR-DE985) or the DIGITAL MD/TAPE OUT jacks (STRDE885). * Sound adjustments do not affect the signal output from the TAPE OUT or MD/DAT OUT jacks (STR-DE985) or the MD/TAPE OUT jacks (STR-DE885). * Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the sources. * The analog audio signals of the current function is output from the REC OUT jacks. * When MULTI CH IN (for STR-DE985, MULTI CH IN 1 or 2) is selected, the analog audio signals of the current function is output from the REC OUT jacks. * No signals are output from DIGITAL OUT jacks (MD/DAT OPTICAL OUT (STR-DE985) or MD/TAPE OPTICAL OUT (STR-DE885)) when you set MULTI/2CH ANALOG DIRECT to 2CH ANALOG DIRECT. You can record the sound from any audio source onto a video tape while copying from a video tape or laser disc. Locate the point where you want to start recording from another audio source, select the program source, then start playback. The audio from that source will be recorded onto the audio track of the video tape instead of the audio from the original medium. To resume audio recording from the original medium, select the video source again. Notes * Make sure to make both digital and analog connections to the TV/SAT and DVD/LD inputs. Analog recording is not possible if you make only digital connections. * The analog audio signals of the current function is output from the REC OUT jacks. * When MULTI CH IN (for STR-DE985, MULTI CH IN 1 or 2) is selected, the analog audio signals of the current function is output from the REC OUT jacks. Other Operations Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Press SLEEP on the remote while the power is on. Recording on a video tape You can record from a VCR, a TV, or an LD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See the operating instructions of your VCR or LD player if you need help. Each time you press the button, the display changes cyclically as follows: 2 : 00 : 00 t 1 : 30 : 00 t 1 : 00 : 00 t 0 : 30 : 00 t OFF The display dims after you have specified the time. While using Sleep Timer, "SLEEP" lights up in the display. Tips 1 Select the program source to be recorded. 2 Prepare the component for playing. For example, insert the laser disc you want to record into the LD player. 3 Insert a blank video tape into the VCR (VIDEO 1 or VIDEO 2) for recording. 4 Start recording on the recording VCR, then start playing the video tape or laser disc you want to record. * Press ALT on the remote before you press SLEEP (page 51). * You can freely specify the time. After pressing SLEEP, specify the time you want using the jog dial and cursor buttons ( or ) on the receiver. The sleep time changes in 1 second intervals. You can specify up to 5 hours. * To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears in the display. 43US www..com Adjustments using the CUSTOMIZE button x 2ch decode mode (2CH MODE) The CUSTOMIZE button allows you to make the following adjustments. Lets you specify the type of decoding for the 2 channel source. This receiver incorporates with Dolby Pro Logic II which has movie mode and music mode, and the receiver can reproduce the 2 channel sound in 5.1 channel through Dolby Pro Logic II. * When set to "PRO LOGIC", the receiver performs the Pro Logic decoding. The source recorded in 2 channel is decoded into 4 channels. * When set to "PL II MOVIE", the receiver performs the Pro Logic II movie mode decoding. This setting is ideal for the movies encoded in Dolby Surround. Besides, this mode can reproduce the sound in 5.1 channel when watching the videos of old movies or in the dubbed language. * When set to "PL II MUSIC", the receiver performs the Pro Logic II music mode decoding. This setting is ideal for the normal stereo sources, such as CDs. Notes 1 Press CUSTOMIZE. 2 Press or to select the parameter you want to adjust. 3 Turn the jog dial to select the setting you want. The setting is entered automatically. 4 Repeat steps 2 and 3 until you have set all of the parameters that follow. Initial settings Parameter Initial setting MENU EXPAND XXX 2CH MODE MULTI CH XXXXXXX1) S. FIELD LINK XXX POWER SAVE XXX AUTO FUNCTION XXX OSD XXXXXXXXXX2) OSD H.POSITION XX2) OSD V.POSITION XX2) COMMAND MODE XXX OFF PL MOVIE SB DECODING XXXXXXX AUTO NONE ON OFF ON COLOR 4 4 AV2 * Dolby Pro Logic II does not function for DTS or MPEG format signals. * "2CH MODE" only appears when you select "NORMAL SURROUND" or "AUTO DECODING". 1) For STR-DE985, MULTI CH 1 or 2 XXXXXXX. 2) STR-DE985 only. x MENU EXPAND Normally, set MENU EXPAND to "OFF" (default setting). When set to "ON", you can select all adjustable parameters for SET UP, SURR, LEVEL and EQ buttons and do the advanced settings for each menu. 44US www..com x Surround back decoding mode (SB DECODING XXXXXX) x CONTROL A1 auto function (AUTO FUNCTION XXX) You can set this parameter using SURR BACK DECODING on the front panel. For details, see page 33. x Multi channel assignment (MULTI CH XXXXXXX) (for STR-DE985, MULTI CH 1 or 2 XXXXXXX) Lets you switch the function of this receiver to the Sony components connected via CONTROL A1 cords (see page 14) automatically when the connected component is set to play mode. x Color of the on-screen display (OSD XXXXXXXXXX) (STR-DE985 only) Lets you assign a function to MULTI CH (for STR-DE985, MULTI CH 1 or 2). You cannot assign TUNER or PHONO. For STR-DE985, you cannot assign the same function to both MULTI CH 1 and 2. x Sound field link (S.FIELD LINK XXX) Lets you select the color of the on-screen display. x OSD horizontal position (OSD H.POSTION XX) (STR-DE985 only) Lets you apply the last selected sound field to a program source whenever it is selected. For example, if you listen to CD with STADIUM as the sound field, change to a different program source, then return to CD, STADIUM will be applied again. x CONTROL A1 power save function (POWER SAVE XXX) Lets you adjust the position of the on-screen display horizontally. Other Operations x OSD vertical position (OSD V.POSTION XX) (STR-DE985 only) Lets you adjust the position of the on-screen display vertically. x Selecting the command mode of the remote (COMMAND MODE XXX) Lets you turn on the receiver automatically when the component connected via CONTROL A1 cords (see page 14) is turned on and the playback is started. When set to "ON", you can save the power consumption of the receiver during standby mode. Lets you select the command mode of the remote. Change the command mode when you use 2 Sony receivers in the same room. 45US www..com CONTROL A1 system control CONTROL A1 compatibility and CONTROL A1 Getting Started This section explains the basic functions of the CONTROL A1 Control System. Certain components have special functions, such as "CD Synchro Dubbing" on cassette decks, that require CONTROL A1 connections. For detailed information regarding specific operations, be sure to also refer to the Operating Instructions supplied with your component(s). The CONTROL A1 control system has been updated to the CONTROL A1 which is the standard system in the Sony 300 disc CD changer and other recent Sony components. Components with CONTROL A1 jacks are compatible with components with CONTROL A1 , and can be connected to each other. Basically, the majority of the functions available with the CONTROL A1 control system will be available with the CONTROL A1 control system. However, when making connections between components with CONTROL A1 jacks and components with CONTROL A1 jacks, the number of functions that can be controlled may be limited depending on the component. For detailed information, refer to the operating instructions supplied with the component(s). The CONTROL A1 Control System was designed to simplify the operation of audio systems composed of separate Sony components. CONTROL A1 connections provide a path for the transmission of control signals which enable automatic operation and control features usually associated with integrated systems. Currently, CONTROL A1 connections between a Sony CD player, amplifier (receiver), MD deck and cassette deck provide automatic function selection and synchronized recording. In the future, the CONTROL A1 connection will work as a multifunction bus allowing you to control various functions for each component. Notes Connections Connect monaural mini-plug cords in series to the CONTROL A1 jacks on the back of each component. You can connect up to 10 CONTROL A1 compatible components in any order. However, you can connect only one of each type of component (i.e., 1 CD player, 1 MD deck, 1 tape deck and 1 receiver). (You may be able to connect more than one CD player or MD deck, depending on the model. Refer to the operating instructions supplied with the respective component for details.) Example * The CONTROL A1 Control System is designed to maintain upward compatibility as the Control System is upgraded to handle new functions. In this case, however, older components will not be compatible with the new functions. * Do not operate a 2 way remote control unit when the CONTROL A1 jacks are connected via a PC interface kit to a personal computer running "MD Editor" or similar application. Also, do not operate the connected component in a manner contrary to the functions of the application, as this may cause the application to operate incorrectly. Amplifier CD MD (Receiver) player deck Tape deck Other component In the CONTROL A1 control system, the control signals flow both ways, so there is no distinction of IN and OUT jacks. If a component has more than one CONTROL A1 jack, you can use either one, or connect different components to each jack. 46US Jacks and connection examples www..com CONTROL A1 Notes CONTROL A1 CD player MD deck * You must connect a CONTROL A1 compatible amplifier (receiver) using a monaural mini-plug cord in order to take advantage of the automatic function selection feature. * This function only works when the components are connected to the amplifier (or receiver) inputs according to the names on the function buttons. Certain receivers allow you to switch the names of the function buttons. In this case, refer to the operating instructions supplied with the receiver. * When recording, do not play any components other than the recording source. It will cause the automatic function selection to operate. On CONTROL A1 jacks and connections Synchronized recording It is possible to make connections between CONTROL A1 and CONTROL A1 jacks. For details regarding particular connections or set up options, refer to the operating instructions supplied with the component(s). About the connecting cord This function lets you conduct synchronized recording between the selected source and recorder components. 1 Set the function selector on the amplifier (or receiver) to the source component. Other Operations Some CONTROL A1 compatible components are supplied with a connecting cord as an accessory. In this case, use the connecting cord for your connection. When using a commercially available cord, use a monaural mini-plug cord less than 2 meters long, with no resistance (such as the Sony RK-G69HG). 2 Set the source component to pause mode (make sure both the N and X indicators light together). 3 Set the recorder component to the REC-PAUSE mode. 4 Press PAUSE on the recorder component. The source component is released from the pause mode, and recording begins shortly thereafter. When playback ends from the source component, recording stops. Notes Basic Functions The CONTROL A1 functions will operate as long as the component you want to operate is turned on, even if all of the other connected components are not turned on. Automatic function selection When you connect a CONTROL A1 compatible Sony amplifier (or receiver) to other Sony components using monaural miniplug cords, the function selector on the amplifier (or receiver) automatically switches to the correct input when you press the play button on one of the connected components. * Do not set more than one component to the pause mode. * Certain recorder components may be equipped with a special synchronized recording function that uses the CONTROL A1 Control System, such as "CD Synchro Dubbing". In this case, refer to the operating instructions supplied with the recorder component. 47US Operations Using the Remote RM-PG411 and RM-PP411 www..com You can use the remote RM-PG411 (STRDE985 only) or RM-PP411 (STR-DE885 only) to operate the components in your system. Remote button description RM-PG411 TV ?/1 AV ?/1 USE MODE P Before you use your remote Inserting batteries into the remote Insert R6 (size-AA) batteries with the + and - properly oriented in the battery compartment. When using the remote, point it at the remote sensor g on the receiver. RM-PP411 TV ?/1 AV ?/1 USE MODE P ?/1 ?/1 SYSTEM STANDBY SLEEP VIDEO1 VIDEO2 VIDEO3 DVD/LD VIDEO1 SYSTEM STANDBY SLEEP VIDEO2 VIDEO3 DVD/LD AV1 AV2 2ND TAPE MD/DAT CD/SACD TV/SAT AV1 AV2 TV/SAT MD/TAPE CD/SACD TUNER M1 M2 TUNER PHONO MULTI CH SOURCE PHONO AUX MULTI CH SOURCE RM-PG411 and RM-PP411 TEST TONE 1 MPX/ DUAL 4 AUDIO 7 SWAP/ ANGLE 8 SUBTITLE ENTER ANALOG DIRECT 5 JUMP/ TIME SOUND FIELD PRESET AUTO DEC MODE 2 2CH 6 PRESET/ CH/D.SKIP 9 3 . SHIFT > 0/10 >10/11 12 D.TUNING DISC ALT m ANT M - CLEAR SEARCH MODE N TOP MENU/ GUIDE X AV MENU x MUTING Tip ENTER/ EXECUTE F G f O DISPLAY TV VOL MASTER VOL g Under normal conditions, the batteries should last for about 6 months. When the remote no longer operates the receiver, replace all batteries with new ones. Notes RETURN/EXIT TV CH TV/ VIDEO MAIN MENU WIDE ON SCREEN * Do not leave the remote in an extremely hot or humid place. * Do not use a new battery with an old one. * Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. * If you don't use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. The tables below show the settings of each button common to both remote RM-PG411 and RM-PP411. Remote Button Operations Function ?/1 SLEEP Receiver Receiver Turns the receiver on or off. Activates the sleep function and the duration which the receiver turns off automatically. 48US www..com Function Remote Operations Button Remote Button Operations Function VIDEO 1 VIDEO 2 VIDEO 3 DVD/LD TV/SAT Receiver Receiver Receiver Receiver Receiver To watch VCR. (VTR mode 3) To watch VCR. (VTR mode 1) To watch VCR. (VTR mode 2) To watch DVD or laser disc. To watch TV programs or satellite receiver. To listen to compact disc. To listen to radio programs. To listen to turntable. Selects MULTI CH IN* source. Selects 2ND AV output. Press to output test tone. Selects preset sound field (e.g. Cinema Studio EX A, B, C). Selects AUTO DECODING mode. Select Dual Mono or Bilingual sound of Dolby Digital or DTS, etc. Selects 2CH ANALOG DIRECT. Selects 2CH mode. Selects sound field mode. Press repeatedly to select a memory page for presetting radio stations or tuning to preset stations. Tuner station direct keyin-mode. Mutes the sound from the receiver. V/v B/b MASTER VOL +/- MAIN MENU Receiver Receiver Receiver Receiver Select a menu item. Makes adjustment or change the setting. Adjusts the master volume of the receiver. Press this button repeatedly to select one of the five cursor modes: EQ, SURR, LEVEL, SET UP and CUSTOMIZE. To display the menus of the receiver on the TV screen. CD/SACD Receiver TUNER PHONO Receiver Receiver ON SCREEN AV ?/1 Receiver MULTI CH Receiver SOURCE TEST TONE PRESET Receiver Receiver Receiver TV/VCR/ Turns the audio and CD player/ video components on or VCD player/ off. LD player/ DVD player/ MD deck/ DAT deck Receiver/TV/ Turns off the receiver and VCR/Satellite other Sony audio/video tuner/CD components. player/VCD player/LD player/ DVD player/ MD deck/DAT deck/Tape deck Receiver Use with "SHIFT" button to select tuner preset station numeric input during DIRECT TUNING or MEMORY mode. Operations Using the Remote RM-PG411 and RM-PP411 AUTO DEC Receiver MPX/DUAL Receiver SYSTEM STANDBY (Press AV ?/1 and ?/1 at the same time) 1-9 and 0/10 ANALOG DIRECT 2CH SHIFT Receiver Receiver Receiver MODE +/- Receiver D.TUNING Receiver MUTING Receiver CD player/ Select track numbers. VCD player/ 0 selects track 10. LD player/ MD deck/ DAT deck TV/VCR/ Select channel numbers. Satellite tuner continued * For STR-DE985, press repeatedly to select MULTI CH IN 1 or 2. 49US www..com Remote Button Description (continued) Remote Button Operations Function Remote Button Operations Function >10/11 CD player/ Select track numbers VCD player/ over 10. LD player/MD deck/Tape deck TV/ VCR/ Changes the sound to DVD player Multiplex, Bilingual or Multi channel TV Sound. TV DVD player Swaps the small and large picture. To select viewing angle or changes the angles. Toggles between the previous and the current channels. AUDIO ./> VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck m/M CD player/ VCD player/ DVD player/ LD player/ MD deck VCR/ DAT deck/ Tape deck N VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck Skips tracks. Searches tracks (forward or backward). SWAP*/ ANGLE Fast forwards or rewinds. Starts play. JUMP/ TIME TV CD player/ Shows the time or VCD player/ displays the playing time DVD player of disc, etc. PRESET/ CH/ Receiver Scans and selects preset stations. X D.SKIP +/- TV/VCR/ Selects preset channels. satellite tuner CD player/ Skips discs (multi-disc VCD player/ changer only). DVD player/ MD deck ENTER TV/VCR/ satellite tuner/ LD player/ MD deck/ DAT deck/ Tape deck CD player/ VCD player VCR After selecting a channel, disc or track using the numeric buttons, press to enter the value. Pauses play or record. (Also starts recording with components in record standby.) x Stops play. DISC Selects a disc directly (multi-disc changer only). Selects output signal from aerial terminal: TV signal or VCR program. ANT * Only for Sony TVs with the picture-in-picture function. DISPLAY TV/VCR/ VCD player/ LD player/ DVD player MD Deck Selects information displayed on the TV screen. Selects information on the display. 50US www..com Function Remote Operations Button Remote Button Operations Function RETURN/ VCD player/ EXIT LD player/ DVD player Satellite tuner SUBTITLE DVD player CLEAR DVD player Returns to the previous menu. Exits the menu. Changes the subtitles. Press if you made a mistake when you press the number button or press to return to the continuous play etc. Select searching mode. Press to select the unit for search (track, index, etc.) Displays DVD title. USE MODE Remote AV1 and AV2 ALT Remote Remote To set up the remote. Select the command mode of the remote. Change remote key function to activate those buttons with orange printing. RM-PG411 only Remote Button Operations Function SEARCH DVD player MODE TOP MENU/ DVD player GUIDE TAPE Receiver To listen to audio tape. To listen to Minidisc or DAT deck. Select the command mode of the remote. To perform several commands in sequence automatically. MD/DAT Receiver 2ND M1 and M2 Remote Remote Satellite tuner Displays guide menu. AV MENU VCR/Satellite Displays menu. tuner/ DVD player O VCD player/ LD player/ DVD player Returns to the previous menu or exits the menu. Operations Using the Remote RM-PG411 and RM-PP411 RM-PP411 only Remote Button Operations Function V/v/B/b VCR/Satellite Selects a menu item. tuner/ DVD player ENTER/ VCR/satellite Press to enter the EXECUTE tuner/ selection. DVD player TV ?/1 -/-TV TV Turns the TV on or off. Selects the channel entry mode, either one or two digit. Adjust the volume of the TV. Select preset TV channels. Selects input signal: TV input or video input. Selects the wide picture mode. MD/TAPE Receiver AUX Receiver To listen to Minidisc or audio tape. To listen to an audio equipment. Notes TV VOL +/- TV TV CH +/- TV TV/ VIDEO WIDE TV TV * Some functions explained in this section may not work depending on the model of the receiver. * The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. * To activate the buttons with orange printing, press ALT first before pressing the buttons. * The MPX/DUAL and 12 functions are not available for set operation (RM-PG411 only). The AUX, SOURCE, MPX/DUAL, 12 and ON SCREEN functions are not available for set operation (RM-PP411 only). * Before you use the V/v/B/b/ENTER/EXECUTE buttons for receiver operation, press MAIN MENU. To operate other components, press TOP MENU/ GUIDE or AV MENU after pressing the function button. 51US www..com Selecting the mode of the remote To check the mode of the remote Press USE MODE. You can check the remote by the indicator. Mode Indicator lights Set the remote mode using the USE MODE button and the remote mode buttons. Selecting the command mode AV1 AV2 2ND (RM-PG411 only) once twice once (for a while) You can switch the command mode (AV1 or AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. Press 1 (AV1) (or 2 (AV2)) while pressing down USE MODE. To reset the remote to factory settings Press =/1, AV =/1, and MASTER VOL - at the same time. The indicator lights once (twice for AV2) , then the command mode switches. Setting to the 2nd room mode. (RM-PG411 only) The indicator lights 3 times, then goes off. Programming the remote You can program the remote to control nonSony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals. You can use the remote to select the function for the 2nd room (2nd room mode). You can use the function buttons only for the 2nd room. Press 2ND while pressing down USE MODE (RM-PG411 only). The indicator lights for a while, then the mode switches to the 2nd room mode. Tips (RM-PG411 only) * If you press a function button while pressing down SOURCE, you can select the function for the 2nd room even though the mode is not set to the 2nd room mode. * If you press SOURCE only, you can output the source signal of the current function of the receiver to the amplifier in the 2nd room. 1 Press AV ?/1 while pressing down USE MODE. The indicator lights. 2 Press the function button (including TV ?/1) for the component you want to control. For example, if you are going to control a CD player, press CD/SACD. 52US Press the numeric www..com buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control. 3 Notes See the tables on pages 54 and 55 for information on the numeric code(s) corresponding to the component and the maker of the component (the first digit and the last two digits of the numeric code correspond to the category and the maker's code respectively.) * The indicator turns off while a valid button is pressed. * In step 2, if several function buttons are pressed, only the last pressed button is valid. * In step 2, if you press TV ?/1, only TV VOL +/-, TV CH +/-, TV/VIDEO and WIDE buttons are reprogrammed. * In step 3, if a function button is pressed, the new function is selected and the programming procedure returns to the beginning of step 3. * For the numeric codes, only the first three numbers entered are valid. 4 Press ENTER. Once the numeric code has been verified, the indicator slowly flashes twice and the remote automatically exits the programming mode. To clear the memory of the remote To clear all programmed and learned signals, do the following to reset the remote to factory settings. Press ?/1, AV ?/1 and MASTER VOL - at the same time. 5 Repeat steps 1 to 4 to control other components. To cancel programming The indicator flashes 3 times, then goes off. Operations Using the Remote RM-PG411 and RM-PP411 Press USE MODE during any step. The remote automatically exits the programming mode. To activate the function after programming. The numeric codes corresponding to the component and the maker of the component Press the programmed button to activate the function you want. If programming is unsuccessful, check the following: * If the indicator does not light up in step 1, the batteries are weak. Replace both batteries. * If the indicator flashes 4 times in quick succession while entering the numeric code, an error has occurred. Start again from step 1. Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the model and year of the component, more than one numeric code may be assigned to a component. If you fail to program your remote using one of the codes, try using other codes. Notes * The numeric codes are based on the latest information available for each brand. There is a chance, however, that your component will not respond to some or all of the codes. * All of the functions on this remote may not be available when used with your particular component. continued 53US www..com remote (continued) Programming the To control an LD player Maker Code(s) To control a CD player Maker Code(s) SONY PIONEER 601, 602, 603 606 SONY DENON JVC KENWOOD MAGNAVOX MARANTZ ONKYO PANASONIC PHILIPS PIONEER TECHNICS YAMAHA 101, 102, 103 104, 123 105, 106, 107 108, 109, 110 111, 116 116 112, 113, 114 115 116 117 115, 118, 119 120, 121, 122 AIWA AKAI BLAUPUNKT EMERSON To control a video CD player Maker Code(s) SONY 605 To control a VCR Maker Code(s) SONY 701, 702, 703, 704, 705, 706 710, 750, 757, 758 707, 708, 709, 759 740 711, 712, 713, 714, 715, 716, 750 717, 718, 719, 720 721, 722, 730 723, 753 724 722, 725, 729, 741 717 726, 727, 728, 736 730, 731, 738 732, 733, 734, 735 736 729, 730, 737, 738, 739, 740 729, 730, 731 729 722, 729, 730, 731, 741, 747 742, 743, 744, 745 717, 720, 746 748, 749 751, 752 747, 755, 756 754 To control a DAT deck Maker Code(s) FISHER GENERAL ELECTRIC GOLDSTAR GRUNDIG HITACHI ITT/NOKIA JVC MAGNAVOX MITSUBISHI/MGA NEC PANASONIC PHILIPS PIONEER RCA/PROSCAN SAMSUNG SANYO SHARP TELEFUNKEN TOSHIBA ZENITH SONY PIONEER 203 219 To control an MD deck Maker Code(s) SONY DENON JVC KENWOOD 301 302 303 304 To control a tape deck Maker Code(s) SONY DENON KENWOOD NAKAMICHI PANASONIC PHILIPS PIONEER TECHNICS YAMAHA 201, 202 204, 205 206, 207, 208, 209 210 216 211, 212 213, 214 215, 216 217, 218 54US www..com To control a DVD player Maker Code(s) SONY PANASONIC PHILIPS PIONEER TOSHIBA DENON 401, 402, 403 406, 408 407 409 404 405 Learning the commands of your components (RM-PG411 only) By using the Learning function, it is possible for this remote to perform learned commands. Setting remote control codes that are not stored in the remote To control a TV Maker Code(s) SONY DAEWOO FISHER GOLDSTAR GRUNDIG HITACHI ITT/NOKIA JVC MAGNAVOX MITSUBISHI/MGA NEC PANASONIC PHILIPS PIONEER RCA/PROSCAN SAMSUNG SANYO SHARP TELEFUNKEN THOMSON TOSHIBA ZENITH 501 504, 505, 506, 507, 515, 544 508 503, 511, 512, 515, 534, 544 517, 534 513, 514, 515, 544 521, 522 516 503, 518, 544 503, 519, 544 503, 520, 544 509, 524 515, 518 509, 525, 526, 540 510, 527, 528, 529, 544 503, 515, 531, 532, 533, 534, 544 When a remote control code is not one of the presets stored in the remote, it is possible for the remote to learn the code using the Learning function. 1 Press TV ?/1 while pressing down USE MODE. The indicator lights. 2 Press the function button (including TV ?/1) for the component you want to learn functions for. Operations Using the Remote RM-PG411 and RM-PP411 For example, if you are going to learn an operation for a CD player, press CD/SACD. 3 Press the button you want to use for the Learning function. The indicator turns off while a valid button is pressed, then blinks slowly. 4 Point the remote control code receiver section of the remote towards the receiver/transmitter on the remote control to be learned. m . N G F f > M X P 508, 545 535 523, 536, 537, 538 530, 537, 539 535, 540, 541 542, 543 g - O x 5-10 cm continued To control a satellite tuner or cable box Maker Code(s) SONY JERROLD/G.I. PANASONIC RCA S. ATLANTA 801, 802 806, 807, 808, 809, 810, 811, 812, 813, 814 818 805, 819 815, 816, 817 55US www..com Learning the commands of your components (continued) To activate the function after programming. Press the programmed button to activate the function you want. 5 Press the appropriate button on the remote control to be learned to send the remote button code. To cancel learning Lightly pressing the button once should be sufficient. If learning is completed successfully, the indicator slowly flashes twice and the remote automatically exits the learning mode. When learning is not completed successfully, the indicator flashes 4 times in quick succession and the procedure returns to step 5. If the memory of the remote is already full, the indicator flashes 8 times in quick succession and the remote automatically exits the learning mode. Notes Press USE MODE during any step. The remote automatically exits the learning mode. To clear the learned codes Start over from step 1. After step 3, press TV ?/1 for more than 2 seconds. The indicator lights twice slowly and the learned code is cleared. If TV ?/1 is pressed less than 2 seconds, the learning procedure returns to the beginning of step 5. When a learned code is cleared, if the button was previously programmed for another function, the programmed code for that button can be used. To clear the memory of the remote * You can program more than 80 keys for the Learning function. In some cases, you may not be able to program even if you have not programmed 80 buttons. The number of buttons you can program for each FUNCTION button are shown in the following table. FUNCTION button area Number of Buttons you can program To clear all programmed and learned signals, do the following to reset the remote to factory settings. At the same time, press ?/1, AV ?/1, and MASTER VOLUME. The indicator flashes 3 times, then goes off. To use a command that has been learned VIDEO 1, VIDEO 2, DVD/LD VIDEO 3, TV/SAT, TAPE MD/DAT, CD/SACD, TUNER PHONO, MULTI CH TV buttons (TV ?/1, TV VOL +/-, TV CH +/-, WIDE, TV/VIDEO) 78 keys 78 keys 78 keys 52 keys 7 keys When selecting a learned function, press the learned button for that function. * In steps 2 and 3, the indicator turns off while a valid button is pressed. * In step 3, if several buttons that can be used for learning are pressed, only the last pressed button is valid. The indiactor blinks slowly, it turns ON while a valid button is pressed. * In step 5, if a button that can be used for learning is pressed, the new button is selected and the learning procedure returns to the beginning of step 5. 56US www..com Performing several commands in sequence automatically (Macro Play) To cancel programming Press USE MODE during any step. The remote automatically exits the macro setting mode. To delay the output of an IR code Start over from step 1. In step 3, * Press M1 (TV/SAT) when the macro setting is M1. * Press M2 (TAPE) when the macro setting is M2. 1 second delay is programmed at this program step. The indicator lights twice slowly, then the remote automatically exits the macro setting mode. To clear the programmed IR codes (RM-PG411 only) The Macro Play function lets you link several IR codes in a sequential order as a single command. The remote provides 2 macro lists (M1 and M2). You can specify up to 10 IR codes for each macro list. Setting the sequence of IR codes 1 Press M1 (or M2) while pressing down USE MODE. Clear each macro step individually. In step 3, * Press M1 (TV/SAT) when the macro setting is M1. * Press M2 (TAPE) when the macro setting is M2. The IR code is cleared. The indicator lights twice slowly, then the remote automatically exits the macro setting mode. To start macro play Press M1 (TV/SAT) or M2 (TAPE) while the ALT indicator turns ON. Note The indicator lights. 2 Press the numeric buttons to select the macro step number. Operations Using the Remote RM-PG411 and RM-PP411 For example, to program step 1, press 1. The indicator blinks slowly. 3 Point the remote control code receiver section of the remote towards the receiver/transmitter on the remote control to be learned. 4 Press the appropriate button on the remote control to be learned to send the remote button code. Lightly pressing the button once should be sufficient. If learning is completed successfully, the indicator slowly flashes twice and the remote automatically exits the learning mode. When learning is not completed successfully, the indicator flashes 4 times in quick succession and the procedure returns to step 4. If the Macro Play function does not work properly, program a delay between each operation. See "To delay the output of an IR code". 5 Repeat steps 1 through 4 to program up to 10 IR codes. Tip If programming is unsuccessful, check the follwing: - If the indicator does not light up in step 1, the batteries are weak. Replace both batteries. - If the indicator lights 4 times in quick succession in step 3, an error has occured. Start again from step 1. 57US Additional Information www..com Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Also, see "Checking the connections" on page 25 to verify that the connections are correct. Should any problem persist, consult your nearest Sony dealer. There is no sound or only a very low-level sound no matter which component is selected. On power sources * Before operating the unit, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the receiver. * The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the receiver itself has been turned off. * If you are not going to use the receiver for a long time, be sure to disconnect the receiver from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord. * (Models of area code U, CA only) One blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. * AC power cord must be changed only at the qualified service shop. On heat buildup Although the unit heats up during operation, this is not a malfunction. If you continuously use this unit at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet. * Check that the speakers and components are connected securely and correctly. * Check that both the receiver and all the components are turned on. * Check that the MASTER VOLUME control is not set at VOLUME MIN. * Check that the SPEAKERS A/B button is not set to "SPEAKER OFF" and is set accordingly to your SPEAKERS FRONT system (page 27). * Press MUTING to cancel the muting function. * Check that the headphones are not connected. * The protective device on the receiver has been activated because of a short circuit ("PROTECT" flashes). Turn off the receiver, eliminate the short-circuit problem and turn on the power again. There is no sound from a specific component. On placement * Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver. * Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. * Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions. * Check that the component is connected correctly to the audio input jacks for that component. * Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component. * Check that you have selected the correct component on the receiver. On operation Before connecting other components, be sure to turn off and unplug the receiver. On cleaning Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any question or problem concerning your receiver, please consult your nearest Sony dealer. 58US www..com of the front There is no sound from one speakers. There is no sound from the active sub woofer. Connect a pair of headphones to the PHONES jack to verify that sound is output from the headphones (page 27). If only one channel is output from the headphones, the component may not be connected to the receiver correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the component. If both channels are output from the headphones, the front speaker may not be connected to the receiver correctly. Check the connection of the front speaker which is not outputting any sound. The left and right sounds are unbalanced or reversed. There is no sound output from the SUB WOOFER terminal depending on the sound field (page 67). The surround effect cannot be obtained. Make sure the sound field function is on (press MODE (SOUND FIELD)). Dolby Digital or DTS multi channel sound is not reproduced. * Check that the playing DVD, etc. is recorded in Dolby Digital or DTS format. * When connecting the DVD player, etc. to the digital input jacks of this receiver, check the audio setting (settings for the audio output) of the connected component. Recording cannot be done. * Check that the speakers and components are connected correctly and securely. * Adjust balance parameters in the LEVEL menu. There is severe hum or noise. * Check that the speakers and components are connected securely. * Check that the connecting cords are away from a transformer or motor, and at least 3 meters away from a TV set or fluorescent light. * Move your TV away from the audio components. * Make sure you have grounded U SIGNAL GND terminal (only when a turntable is connected). * The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. There is no sound or only a very low-level sound is heard from the center or/and surround speakers. * Check that the components are connected correctly. * Select the source component with FUNCTION control. * Make sure that INPUT MODE is set to "ANALOG 2CH FIXED" before recording from a digital component connected to the analog MD/DAT or TAPE terminals (STR-DE985) or the analog MD/TAPE terminals (STR-DE885). * Make sure that INPUT MODE is set to "COAXIAL FIXED" or "OPTICAL FIXED" (page 26) before recording from a digital component connected to the DIGITAL MD/DAT OUT terminals (STR-DE985) or the DIGITAL MD/TAPE OUT terminals (STR-DE885). Additional Information continued * Make sure the sound field function is on (press MODE (SOUND FIELD)). * Select a sound field containing the word "CINEMA STUDIO EX" (pages 29-30). * Adjust the speaker level (page 25). * Make sure the center or/and surround speaker size parameter is set to either "SMALL" or "LARGE" (page 21). 59US www..com (continued) Troubleshooting There is no picture or an unclear picture appears on the TV screen or monitor. To connect an LD player via an RF demodulator. Connect the LD player to the RF demodulator, then connect the RF demodulator's optical or coaxial digital output to the receiver's jack. When making this connection, be sure to set INPUT MODE manually (page 26). The receiver may not operate correctly if INPUT MODE is set to "AUTO 2CH". For details on DOLBY DIGITAL RF hookups, see the operating instructions supplied with your RF demodulator. The FM reception is poor. * Select the appropriate function on the receiver. * Set your TV to the appropriate input mode. * Move your TV away from the audio components. The remote does not function. Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below. If you connect the receiver to an outdoor antenna, ground it against lightning. To prevent a gas explosion, do not connect the ground wire to a gas pipe. Receiver ANTENNA Outdoor FM antenna AM * The MPX/DUAL and 12 buttons on the remote are not available (RM-PG411 only). * The AUX, SOURCE, MPX/DAUL, 12 and ON SCREEN buttons on the remote are not available (RM-PP411 only). * Point the remote at the remote sensor g on the receiver. * Check that the mode of the remote corresponds to that of the receiver (page 44 and 52). * Remove any obstacles in the path between the remote and the receiver. * Replace both batteries in the remote with new ones, if they are weak. * Make sure you select the correct function on the remote. * Press MAIN MENU on the remote before you use the V/v/B/b buttons for receiver operation (page 51). y FM 75 COAXIAL Ground wire (not supplied) Clearing the receiver's memory To clear See All memorized settings To ground Radio stations cannot be tuned in. page 19 page 39 Customized sound fields * Check that the antennas are connected securely. Adjust the antennas and connect an external antenna if necessary. * The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning. * Make sure you set the tuning interval correctly (when tuning in AM stations with direct tuning). * No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 41). * Press DISPLAY so that the frequency appears in the display. 60US www..com Specifications Inputs (Digital) DVD/LD (Coaxial) AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: CD/SACD, TV/SAT, MD/DAT2), MD/ TAPE3) , VIDEO 3 (Optical) Outputs (Analog) MD/DAT2), TAPE2) MD/TAPE3) (OUT), VIDEO 1, 2 (AUDIO OUT) SUB WOOFER, SURR BACK, 2ND ROOM2) Outputs (Digital) MD/DAT2), MD/TAPE3) (Optical) 2) 3) 4) 5) Sensitivity: - Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: - Impedance: - S/N: 100 dB (A, 20 kHz LPF) With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09 % total harmonic distortion from 250 milliwatts to rated output (Models of area code U only). Amplifier section POWER OUTPUT Models of area code U, CA Rated Power Output at Stereo Mode (8 ohms 20 Hz - 20 kHz, THD 0.09 %) 100 W + 100 W Reference Power Output (8 ohms 1 kHz, THD 0.7 %) FRONT1): 100 W/ch CENTER1): 100 W 1) SURR : 100 W/ch 1)2) 100 W SURR BACK : 1) Depending on the sound field settings and the source, there may be no sound output. Frequency response PHONO MULTI CH IN (1, 2)2), CD/SACD, TAPE2), MD/DAT2), MD/ TAPE3) , TV/SAT, DVD/LD, VIDEO 1, 2, 3 Inputs (Analog) PHONO Voltage: 250 mV Impedance: 10 kilohms Voltage: 2 V Impedance: 1 kilohms Sensitivity: - STR-DE985 only. STR-DE885 only. INPUT SHORT. Weighted network, input level. 99 Hz~1.0 kHz (21 steps) 198 Hz~10 kHz (37 steps) 1.0 kHz~10 kHz (23 steps) 10 dB, 1 dB step Additional Information EQ BASS: MID: TREBLE: Gain levels: RIAA equalization curve 0.5 dB 10 Hz - 70 kHz +0.5/-2 dB (with sound field and equalizer bypassed) FM tuner section Tuning range Antenna terminals 87.5 - 108.0 MHz 75 ohms, unbalanced Sensitivity: 4 mV Impedance: 50 kilohms S/N4): 86 dB (A, 4 mV5)) Sensitivity: 250 mV Impedance: 50 kilohms S/N4): 96 dB (A, 250 mV5)) Intermediate frequency 10.7 MHz Sensitivity Mono: Stereo: Usable sensitivity S/N Mono: Stereo: 18.3 dBf, 2.2 V/75 ohms 38.3 dBf, 22.5 V/75 ohms 11.2 dBf, 1 V/75 ohms 76 dB 70 dB MULTI CH IN (1, 2)2), CD/SACD, TAPE2), MD/DAT2), MD/ TAPE3) , TV/SAT, DVD/LD, VIDEO 1, 2, 3 continued 61US www..com Specifications (continued) Harmonic distortion at 1 kHz Mono: 0.3% Stereo: 0.5% Separation Frequency response Selectivity 45 dB at 1 kHz 30 Hz - 15 kHz, +0.5/-2 dB 60 dB at 400 kHz General Power requirements Area code Power requirements U, CA 120 V AC, 60 Hz Power consumption Area code Power consumption U CA STR-DE985: 265 W STR-DE885: 210 W STR-DE985: 360 VA STR-DE885: 300 VA AM tuner section Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 - 1710 kHz6) With 9-kHz tuning scale: 531 - 1710 kHz6) Antenna Loop antenna Dimensions Power consumption (during standby mode) 0.5 W (when "POWER SAVE" in the CUSTOMIZE menu is set to "ON") (page 44). AC outlets Intermediate frequency 450 kHz Usable sensitivity S/N Harmonic distortion Selectivity At 9 kHz: At 10 kHz: 50 dB/m (at 1,000 kHz or 999 kHz) 54 dB (at 50 mV/m) 0.5 % (50 mV/m, 400 Hz) 35 dB 40 dB Mass (Approx.) 2 switched, 120 W/1A MAX 430 x 157.5 x 369 mm (16 7/8 x 6 2/8 x 14 4/8 inches) including projecting parts and controls 9.5 kg (20 lb 16 oz) 6) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Supplied accessories FM wire antenna (1) AM loop antenna (1) Remote commander (1) * RM-PG411 (STR-DE985 only) * RM-PP411 (STR-DE885 only) R6 (size-AA) batteries (2) Audio/video/control S cord (STR-DE985 only) (1) Monaural mini-plug cord (STR-DE985 only) (1) For details on the area code of the component you are using, see page 4. Design and specifications are subject to change without notice. Video section Inputs Video: S-video: Component Video: 1 Vp-p, 75 ohms Y: 1 Vp-p, 75 ohms C: 0.286 Vp-p, 75 ohms Y: 1 Vp-p, 75 ohms PB B-Y: 0.7 Vp-p, 75 ohms PR R-Y: 0.7 Vp-p, 75 ohms 1 Vp-p, 75 ohms Y: 1 Vp-p, 75 ohms C: 0.286 Vp-p, 75 ohms Y: 1 Vp-p, 75 ohms PB B-Y: 0.7 Vp-p, 75 ohms PR R-Y: 0.7 Vp-p, 75 ohms Outputs Video: S-video: Component Video: 62US www..com Tables of settings using SURR, LEVEL, EQ, SET UP and CUSTOMIZE buttons You can make various settings using the LEVEL, SURR, EQ, SET UP and CUSTOMIZE buttons, jog dial, and cursor buttons. The tables below show each of the settings that these buttons can make. Press Press or to select Turn jog dial to select Page SURR EFFECT WALL S_I_H1) REVERB S_I_L1) FRONT REVERB1) SCREEN DEPTH1) VIR. SPEAKERS 1) depends on the sound field (21 steps) -8 to +8 (1 increment steps) -8 to +8 (1 increment steps) DRY, STD, WET OFF, MID, DEEP OFF, ON -8 dB to +8 dB (1 dB steps) -10 dB to +10 dB (1 dB steps) -10 dB to +10 dB (1 dB steps) -10 dB to +10 dB (1 dB steps) -10 dB to +10 dB (1 dB steps) -10 dB to +10 dB (1 dB steps) OFF, -20 dB to 0 dB (1 dB steps) OFF, 0.1 to 0.9 (0.1 steps), STD, MAX 35 LEVEL FRONT L_I_R CENTER LEVEL XXX dB SURR L LEVEL XXX dB SURR R LEVEL XXX dB SURR BACK LEVELXXX dB S. WOOFER LEVEL XXX dB LFE MIX LEVEL XXX dB1) D. RANGE COMP. XXX1) 37 Additional Information 1) You can set this parameter only when you set "MENU EXPAND" to "ON" in the CUSTOMIZE menu (page 44). continued 63US www..com using SURR, LEVEL, EQ, SET UP and CUSTOMIZE buttons Tables of settings (continued) Press Press or to select Turn jog dial to select Page EQ FRONT BASS GAIN FRONT BASS FREQUENCY1) FRONT MID GAIN FRONT MID FREQUENCY1) FRONT TREBLE GAIN FRONT TREBLE FREQUENCY1) CENTER BASS GAIN CENTER BASS FREQUENCY1) CENTER MID GAIN CENTER MID FREQUENCY1) CENTER TREBLE GAIN CENTER TREBLE FREQUENCY1) SURROUND BASS GAIN SURROUND BASS FREQUENCY1) SURROUND TREBLE GAIN SURROUND TREBLE FREQUENCY1) SURROUND BACK BASS GAIN SURROUND BACK BASS FREQUENCY1) SURROUND BACK TREBLE GAIN SURROUND BACK TREBLE FREQUENCY1) -10 dB to +10 dB (1 dB steps) 99 Hz to 1.0 kHz (21 steps) -10 dB to +10 dB (1 dB steps) 198 Hz to 10 kHz (37 steps) -10 dB to +10 dB (1 dB steps) 1.0 kHz to 10 kHz (23 steps) -10 dB to +10 dB (1 dB steps) 99 Hz to 1.0 kHz (21 steps) -10 dB to +10 dB (1 dB steps) 198 Hz to 10 kHz (37 steps) -10 dB to +10 dB (1 dB steps) 1.0 kHz to 10 kHz (23 steps) -10 dB to +10 dB (1 dB steps) 99 Hz to 1.0 kHz (21 steps) -10 dB to +10 dB (1 dB steps) 1.0 kHz to 10 kHz (23 steps) -10 dB to +10 dB (1 dB steps) 99 Hz to 1.0 kHz (21 steps) -10 dB to +10 dB (1 dB steps) 1.0 kHz to 10 kHz (23 steps) 38 1) You can set this parameter only when you set "MENU EXPAND" to "ON" in the CUSTOMIZE menu (page 44). 64US www..com or Press Press SET UP FRONT CENTER SURROUND SURR BACK SUB WOOFER SURR POSI.1) to select Turn jog dial to select Page SMALL, LARGE NO, SMALL, LARGE NO, SMALL, LARGE NO, SMALL, LARGE NO, YES SIDE, MIDDLE, BEHIND LOW, HIGH LOW, HIGH 3 feet to 40 feet (1 foot steps)2) 1) 1) 1) 1) 20 SURR HEIGHT1) SURR BACK HGT.1) FRONT XX.X feet1) CENTER XX.X feet SURROUND XX.X feet 3 feet to 40 feet (1 foot steps)2) 3 feet to 40 feet (1 foot steps)2) 3 feet to 40 feet (1 foot steps)2) 3 feet to 40 feet (1 foot steps)2) meter, feet 40 Hz to 200 Hz (10 Hz steps) 40 Hz to 200 Hz (10 Hz steps) 40 Hz to 200 Hz (10 Hz steps) 40 Hz to 200 Hz (10 Hz steps) 40 Hz to 200 Hz (10 Hz steps) NORMAL, REVERSE OFF, ON PRO LOGIC, PL MOVIE, PL MUSIC OFF, AUTO, MATRIX NONE, Every function (except for TUNER and PHONO) OFF, ON OFF, ON OFF, ON COLOR, MONOCHROME 0 to 64 (1 steps) 0 to 32 (1 step) AV1, AV2 44 SURR BACK XX.X feet DISTANCE UNIT 1) SUB WOOFER XX.X feet FRONT SP > XXX Hz1) 3) CENTER SP > XXX Hz1) 3) SURROUND SP > XXX Hz1) 3) SURR BACK SP > XXX Hz1) 3) LFE HIGH CUT > XXX Hz1) S.W PHASE1) CUSTOMIZE MENU EXPAND 2CH MODE SB DECODING XXXXXXX MULTI CH XXXXXXX4) S.FIELD LINK XXX POWER SAVE XXX AUTO FUNCTION XXX OSD XXXXXXXXXX5) OSD H.POSITION XX5) OSD V.POSITION XX5) COMMAND MODE XXX Additional Information 1) You can set this parameter only when you set "MENU EXPAND" to "ON" in the CUSTOMIZE menu (page 44). 2) Or 1 meter to 12 meters (0.1 meter steps). 3) When the speakers are set to SMALL only. 4) For STR-DE985, MULT CH 1 XXXXXXX or MULTI CH 2 XXXXXXX. 5) STR-DE985 only. 65US www..com Adjustable parameters for each sound field The adjusted SURR and EQ parameters are stored in each sound field. The adjusted LEVEL parameters are applied to all the sound fields. < SURR > EFFECT LEVEL 2CH STEREO AUTO DECODING NORMAL SURROUND CINEMA STUDIO EX A CINEMA STUDIO EX B CINEMA STUDIO EX C MONO MOVIE STEREO MOVIE D. CONCERT HALL A D. CONCERT HALL B CHURCH OPERA HOUSE JAZZ CLUB DISCO / CLUB LIVE CONCERT ARENA STADIUM GAME HEADPHONE (2CH) HEADPHONE (DIRECT) HEADPHONE (MULTI)1) HEADPHONE THEATER MULTI CH IN2) 2CH ANALOG DIRECT PCM96K z z z z z z z z z z z z z z z z WALL TYPE REVERB TIME FRONT REVERB SCREEN DEPTH VIRTUAL SPEAKERS z z z z z z z z z z z z z z z z z z z z z z z z z z z z 1) For STR-DE985, HEADPHONE (MULTI 1) or HEADPHONE (MULTI 2). 2) For STR-DE985, MULTI CH IN 1 or 2. 66US www..com < LEVEL > FRONT CENTER SURR L BAL LEVEL LEVEL 2CH STEREO AUTO DECODING NORMAL SURROUND CINEMA STUDIO EX A CINEMA STUDIO EX B CINEMA STUDIO EX C MONO MOVIE STEREO MOVIE D. CONCERT HALL A D. CONCERT HALL B CHURCH OPERA HOUSE JAZZ CLUB DISCO / CLUB LIVE CONCERT ARENA STADIUM GAME HEADPHONE (2CH) HEADPHONE (DIRECT) HEADPHONE (MULTI)3) HEADPHONE THEATER MULTI CH IN 1 MULTI CH IN 2 2CH ANALOG DIRECT PCM96K z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z SURR R SURR BACKS. WOOFER LFE LEVEL LEVEL LEVEL MIX1) z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z2) z2) z2) z2) z2) z z2) z2) z2) z z z z z z z z z z z z z z z z z z D.RANGE COMP1) z z z z z z z z z z z z z z z z z z Additional Information z z z z z z z 1) These parameters may not operate depending on the source or adjustments. For details, see each item in "Adjusting the level parameters" (page 37). 2) When these sound fields are selected, there is no sound output from the sub woofer if the front speaker size is set to "LARGE". However, sound will be output from the sub woofer if the digital input signal contains L.F.E. signals. 3) For STR-DE985, HEADPHONE (MULTI 1) or HEADPHONE (MULTI 2). continued 67US www..com Adjustable parameters for each sound field (continued) < EQ > < BASS GAIN 2CH STEREO AUTO DECODING NORMAL SURROUND CINEMA STUDIO EX A CINEMA STUDIO EX B CINEMA STUDIO EX C MONO MOVIE STEREO MOVIE D. CONCERT HALL A D. CONCERT HALL B CHURCH OPERA HOUSE JAZZ CLUB DISCO / CLUB LIVE CONCERT ARENA STADIUM GAME HEADPHONE (2CH) HEADPHONE (DIRECT) HEADPHONE (MULTI)1) HEADPHONE THEATER MULTI CH IN2) 2CH ANALOG DIRECT PCM96K z z z z z z z z z z z z z z z z z z z z FRONT BASS FREQ z z z z z z z z z z z z z z z z z z z MID GAIN z z z z z z z z z z z z z z z z z z z MID FREQ z z z z z z z z z z z z z z z z z z z TREBLE GAIN z z z z z z z z z z z z z z z z z z z > TREBLE FREQ z z z z z z z z z z z z z z z z z z z z z z z z 1) For STR-DE985, HEADPHONE (MULTI 1) or HEADPHONE (MULTI 2). 2) For STR-DE985, MULTI CH IN 1 or 2. 68US www..com < EQ > < BASS GAIN 2CH STEREO AUTO DECODING NORMAL SURROUND CINEMA STUDIO EX A CINEMA STUDIO EX B CINEMA STUDIO EX C MONO MOVIE STEREO MOVIE D. CONCERT HALL A D. CONCERT HALL B CHURCH OPERA HOUSE JAZZ CLUB DISCO / CLUB LIVE CONCERT ARENA STADIUM GAME HEADPHONE (2CH) HEADPHONE (DIRECT) HEADPHONE (MULTI)1) HEADPHONE THEATER MULTI CH IN2) 2CH ANALOG DIRECT PCM96K z z z z z z z z z z z z z z z z z BASS FREQ z z z z z z z z z z z z z z z z z CENTER MID MID GAIN FREQ z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z TREBLE GAIN z z z z z z z z z z z z z z z z z > TREBLE FREQ z z z z z z z z z z z z z z z z Additional Information z 1) For STR-DE985, HEADPHONE (MULTI 1) or HEADPHONE (MULTI 2). 2) For STR-DE985, MULTI CH IN 1 or 2. continued 69US www..com Adjustable parameters for each sound field (continued) < EQ > < BASS GAIN 2CH STEREO AUTO DECODING NORMAL SURROUND CINEMA STUDIO EX A CINEMA STUDIO EX B CINEMA STUDIO EX C MONO MOVIE STEREO MOVIE D. CONCERT HALL A D. CONCERT HALL B CHURCH OPERA HOUSE JAZZ CLUB DISCO / CLUB LIVE CONCERT ARENA STADIUM GAME HEADPHONE (2CH) HEADPHONE (DIRECT) HEADPHONE (MULTI)1) HEADPHONE THEATER MULTI CH IN2) 2CH ANALOG DIRECT PCM96K z z z z z z z z z z z z z z z z z SURROUND/SURROUND BACK BASS TREBLE FREQ GAIN z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z > TREBLE FREQ z z z z z z z z z z z z z z z z z 1) For STR-DE985, HEADPHONE (MULTI 1) or HEADPHONE (MULTI 2). 2) For STR-DE985, MULTI CH IN 1 or 2. 70US www..com Additional Information Sony Corporation Printed in Malaysia 71US |
Price & Availability of STR-DE885
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |